Can somebody help me know why this is happeneing. I keep getting these rough edges when cutting my file. My vectors are all smooth but when I model it, I get these edges on everything.
Thanks, Oscar
Rough Edges
- AngelicDiablo
- Vectric Craftsman
- Posts: 161
- Joined: Sun Oct 15, 2006 1:46 am
- Model of CNC Machine: Shopbot BT48 Standard
- Location: Houston, Texas
- Contact:
-
- Vectric Wizard
- Posts: 1261
- Joined: Sun Jan 11, 2009 4:30 am
- Model of CNC Machine: 2014 roc-tech 4x8 with servos
- Location: bridgeton, indiana
Re: Rough Edges
do you have it doing a finish pass with an end mill?
http://www.3dsigncamp.com
http://www.roctechusacnc.com
http://www.roctechusacnc.com
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Rough Edges
What is your resolution set at? I would set it to very high and remodel it.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- AngelicDiablo
- Vectric Craftsman
- Posts: 161
- Joined: Sun Oct 15, 2006 1:46 am
- Model of CNC Machine: Shopbot BT48 Standard
- Location: Houston, Texas
- Contact:
Re: Rough Edges
Finishing pass is with a 1/16 BM @ 8% stepover. Resolution does not matter as I also get it on the finished product. -Oscar
Buckle up... it makes it harder for the aliens to suck you out of your car!
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Rough Edges
If you see it in the preview, you will see it on your finished work. Take us through your modeling steps...there is an issue there somewhere.
Angie
Angie
-
- Vectric Wizard
- Posts: 4797
- Joined: Thu May 18, 2006 3:24 pm
- Model of CNC Machine: ShopBot
- Location: North Carolina
Re: Rough Edges
We are talking Model Resolution here, not screen resolution.Resolution does not matter as I also get it on the finished product
This looks like a Model Resolution issue to me, can you post the file or make it available for download - assuming no copyright issues.
Tim
Re: Rough Edges
It is the vertical wall problem, See also: http://www.vectric.com/forum/viewtopic.php?f=27&t=14370. There is quite abit posted on this issue/problem.
Increase your model resolution to maximum. If you can taper the vertical walls it with also help with the "jaggies". There is also some other workrounds, do a search.
Good Luck
Mike
Increase your model resolution to maximum. If you can taper the vertical walls it with also help with the "jaggies". There is also some other workrounds, do a search.
Good Luck
Mike
Mike E
CuttingandCarving.com
CuttingandCarving.com
- AngelicDiablo
- Vectric Craftsman
- Posts: 161
- Joined: Sun Oct 15, 2006 1:46 am
- Model of CNC Machine: Shopbot BT48 Standard
- Location: Houston, Texas
- Contact:
Re: Rough Edges
Thanks, I'll check out the other posts. It was originally modeled at "Very High". So I'll keep looking for answers.
-Oscar
-Oscar
Buckle up... it makes it harder for the aliens to suck you out of your car!