One of my firsts

The Gallery is for posting images of work machined using Cut3D
Post Reply
User avatar
Greasetattoo
Vectric Wizard
Posts: 852
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

One of my firsts

Post by Greasetattoo »

Hello All,
Here is a model I cut last nite.
It took about 6 hours.

It is done in some Freeman green foam sample that I had.

I would rather do it in wax, then cast it!
At this size...

The model was done in AC3D.

Hope you all like it!
Vectric software is one of the best!

Grease
Attachments
pulse rifle.jpg
pulse.jpg

CRFultz
Vectric Wizard
Posts: 1160
Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas

Post by CRFultz »

Thats too cool....

can you scale it larger...say full size?

User avatar
Greasetattoo
Vectric Wizard
Posts: 852
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Post by Greasetattoo »

Well, on my machine I can only do 4" x 4" x 14".

But, my brothers home built cnc, he can do 4' x 3'.

Fun stuff!

Post Reply