Technique Help

This forum is for general discussion regarding VCarve Pro
Post Reply
User avatar
doglaw
Vectric Apprentice
Posts: 88
Joined: Wed Oct 12, 2005 9:00 pm
Location: Coeur d'Alene, Idaho
Contact:

Technique Help

Post by doglaw »

Brain/Tony:

Whilst thumbing through your gallery images, I came across the A&E image and was interested in how you created it. From the looks of the image, the depth of the carve around the letters is shallower at the base of the letters then the top. Likewise, the letters themselves are cut deeper at the top of the letters then at the base. Could you share the crv file with me - or at least explain how you accomplished this with V-carve?

Love the software!

Doug
Attachments
a_and_e_large.jpg
(18.06 KiB) Downloaded 104 times

User avatar
Tony Mac
Vectric Alumni
Posts: 1965
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK
Contact:

Post by Tony Mac »

Hi Doug,

What you are seeing is simply an optical illusion.

This is created because the logo tapers inwards on the top edge of the letters, hence the vcarving gets deeper.

The crv file is attached so you can take a look at how the toolpath has been calculated.

Tony
Attachments
A&E.crv
(65.5 KiB) Downloaded 197 times

Post Reply