Sei 810 Peronnel Router
-
- Posts: 17
- Joined: Wed Jul 20, 2011 8:04 pm
- Model of CNC Machine: Sei 810 personel router
Sei 810 Peronnel Router
I am completely new to cnc and have just downloaded the trail version of cut2d. Sei is not listed on the choice of CNC machines. Does anyone out there have an Sei machine and a driver (if thats the right term) that I could down load.
- glenn
- Vectric Wizard
- Posts: 582
- Joined: Wed Jul 02, 2008 11:23 pm
- Model of CNC Machine: home brew 40x20
- Location: McArthur, Ohio U.S.A.
Re: Sei 810 Peronnel Router
Hi, If you don't have any luck with finding the correct driver, and you are getting into this cnc world at hobby level, I would suggest gutting it out and going with mach3 and an old pentium 4 tower, plenty of how-to help on the mach forum
http://www.machsupport.com/forum/index.php and in the end, you will have a really nice machine with easy to understand and use controls from a common system type g-code.
Good luck,
Glenn
http://www.machsupport.com/forum/index.php and in the end, you will have a really nice machine with easy to understand and use controls from a common system type g-code.
Good luck,
Glenn
-
- Posts: 17
- Joined: Wed Jul 20, 2011 8:04 pm
- Model of CNC Machine: Sei 810 personel router
Re: Sei 810 Peronnel Router
Hi Glenn,
Thanks for your response. Mach 3's always an option, but it seems an expensive one at the moment.
Thanks,
Paul
Thanks for your response. Mach 3's always an option, but it seems an expensive one at the moment.
Thanks,
Paul