shark pro sd card capacity
shark pro sd card capacity
Does anyone know what capacity the sd card is for the shark pro. It came with 1gb and I need to increase, I have tried a 16 gb and 4gb and can't get either to work.
-
esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: shark pro sd card capacity
I have used a 2G with my Shark not a pro. You need to put it in a reader and format it first.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
Adrian
- Vectric Archimage
- Posts: 14637
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: shark pro sd card capacity
Msut be a pretty big set of cut files if they don't fit on 1gb. 
-
esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: shark pro sd card capacity
Sorry for the slow reply but.... I've been on travel. I'm not saying you need a 2G I'm just saying I have used one. I don't think it hurts and the price difference is minuscule.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/