Can't smooth edge of relief

This section is for useful tips and tricks for Aspire
Post Reply
User avatar
Paco
Vectric Wizard
Posts: 480
Joined: Fri Sep 16, 2005 6:30 pm
Location: Valcourt, Québec, Canada
Contact:

Can't smooth edge of relief

Post by Paco »

This been covered before but I can't find it _now_. What's going on wrong, how can I prevent it and/or fix it?
Attachments
2815_v1d_problem.jpg

rej
Vectric Wizard
Posts: 1261
Joined: Sun Jan 11, 2009 4:30 am
Model of CNC Machine: 2014 roc-tech 4x8 with servos
Location: bridgeton, indiana

Re: Can't smooth edge of relief

Post by rej »

try having a zero depth base for the object to sit on
http://www.3dsigncamp.com
http://www.roctechusacnc.com

User avatar
Paco
Vectric Wizard
Posts: 480
Joined: Fri Sep 16, 2005 6:30 pm
Location: Valcourt, Québec, Canada
Contact:

Re: Can't smooth edge of relief

Post by Paco »

I have "fixed" my problem but I'm not 100% sure how I did. :oops: Kind of in a rush right now... I did noticed that my modeling plane is off but can't seem to be able to fixed that correctly. Things are just moving (Z) around. Seem I've messed up during modeling components... only a few I had problem with. I'll try to duplicate when I'll have time. :?

User avatar
Paco
Vectric Wizard
Posts: 480
Joined: Fri Sep 16, 2005 6:30 pm
Location: Valcourt, Québec, Canada
Contact:

Re: Can't smooth edge of relief

Post by Paco »

Can't wrap my head around the components 'Base Height' in the 'Component Properties' dialog and the 'Modeling Plane' in the Material Setup dialog... they seem linked but then... :?

User avatar
Paco
Vectric Wizard
Posts: 480
Joined: Fri Sep 16, 2005 6:30 pm
Location: Valcourt, Québec, Canada
Contact:

Re: Can't smooth edge of relief

Post by Paco »

I probably just need that smack behing the head... :oops:

User avatar
Paco
Vectric Wizard
Posts: 480
Joined: Fri Sep 16, 2005 6:30 pm
Location: Valcourt, Québec, Canada
Contact:

Re: Can't smooth edge of relief

Post by Paco »

It happen when the modeling plane get above the component I'm smoothing or sculpting. The "pixels" are trying to reach the surface. I guess I'll have to change some habits.

Post Reply