A new guy question
- GripUs
- Vectric Wizard
- Posts: 806
- Joined: Thu Jan 18, 2007 2:07 pm
- Location: San Angelo, Texas
- Contact:
A new guy question
I have been using my Techno-Isel CNC router to make pistol grips for about two years and thought that making a few signs would keep the machine busy when I wasn't cutting grips. I am impressed with the ease of use of VCarvePro, but if ignorance is bliss I am the happiest guy using it. I managed to create the tool paths for my first sign (my company logo) but would like the preview to fill the part of the sign NOT routered as that is how it will look when I finish it. I plan to paint first, then cut. Is there a way to do that?
Thanks,
Joe
Thanks,
Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
http://www.gripus.com/
Yes you can.
Adding Custom Materials Additional materials can be added to the library list by simply copying a image file (JPG, BMP or TIF) of the material or image you wish to render the job with into the folder,
/Program files/VCarve Wizard/Textures/1_Wood etc.
A custom folder that includes shading materials can also ne added by simply creating a folder in the Textures folder as shown below.
/Program files/VCarve Wizard/Textures/5_My_Shading_Textures
Notes VCarve Wizard must be restarted when new materials are added.
Shading textures can be obtained from sources such as the internet, clipart libraries or simply create your own from a digital or scanned photographs. For good quality results the image needs to be approximately 1000 pixels x 1000 pixels.
The texture image is simply scaled proportionally in X & Y to fit the longest side of the job
I hope this helps
Dan
Adding Custom Materials Additional materials can be added to the library list by simply copying a image file (JPG, BMP or TIF) of the material or image you wish to render the job with into the folder,
/Program files/VCarve Wizard/Textures/1_Wood etc.
A custom folder that includes shading materials can also ne added by simply creating a folder in the Textures folder as shown below.
/Program files/VCarve Wizard/Textures/5_My_Shading_Textures
Notes VCarve Wizard must be restarted when new materials are added.
Shading textures can be obtained from sources such as the internet, clipart libraries or simply create your own from a digital or scanned photographs. For good quality results the image needs to be approximately 1000 pixels x 1000 pixels.
The texture image is simply scaled proportionally in X & Y to fit the longest side of the job
I hope this helps
Dan
- GripUs
- Vectric Wizard
- Posts: 806
- Joined: Thu Jan 18, 2007 2:07 pm
- Location: San Angelo, Texas
- Contact:
Thanks Phil and Dan...
When I look at the preview, the tool paths are shown in the fill color (in this case a dark blue) and the letters appear as oak. I plan on painting the material and then cutting the sign so, in reality, the background will be oak and the letters will be dark blue. In the preview, I want the blue and the oak reversed.
Thanks for your replies
Joe
When I look at the preview, the tool paths are shown in the fill color (in this case a dark blue) and the letters appear as oak. I plan on painting the material and then cutting the sign so, in reality, the background will be oak and the letters will be dark blue. In the preview, I want the blue and the oak reversed.
Thanks for your replies
Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
http://www.gripus.com/
- GripUs
- Vectric Wizard
- Posts: 806
- Joined: Thu Jan 18, 2007 2:07 pm
- Location: San Angelo, Texas
- Contact:
You can see a lot of my stuff at http://www.gripus.com/ . Right now I just cut out the grips with the machine and finish them by hand. All of my inlays I do with a laser...cutting the holes and the insert. Up until now my CNC machine has seen only simple usage. I have a Roland 3D scanner to produce DXF files for grips I have never cut before. I have some bits ordered which should be here next week and I hope to make my first sign. We also make pet cremation urns and are looking into pet caskets. The machine and VCP will allow me to do wonderful things on the sides and lids.
I will keep you posted.
Joe
I will keep you posted.
Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
http://www.gripus.com/
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Hi Joe,
There is no way currently of getting the machined away part to have a wood texture, if you are using the 'texture' bitmap to give a colour to the unmachined parts of the blank. Currently we only support 1 texture bitmap and a colour to represent the machined areas.
You can 'PhotoShop' this 'fairly' easily by merging two images of the piece, one shaded with the surface colour and one with the plain wood. However, this is obviously a lot more work than just being able to create an image the other way round in VCarve.
Sorry
Brian
There is no way currently of getting the machined away part to have a wood texture, if you are using the 'texture' bitmap to give a colour to the unmachined parts of the blank. Currently we only support 1 texture bitmap and a colour to represent the machined areas.
You can 'PhotoShop' this 'fairly' easily by merging two images of the piece, one shaded with the surface colour and one with the plain wood. However, this is obviously a lot more work than just being able to create an image the other way round in VCarve.
Sorry
Brian
- GripUs
- Vectric Wizard
- Posts: 806
- Joined: Thu Jan 18, 2007 2:07 pm
- Location: San Angelo, Texas
- Contact:
Thanks for all the help, folks. And thanks for the pistol. I currently use a pistol for the "r" in my GripUs logo, but this one might just work a lot better!
Joe
Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
http://www.gripus.com/