Easy BoxJoint Maker 3.2

This forum is for users to submit their own gadgets to the community
User avatar
BenjaminwithCNC
Posts: 29
Joined: Thu Feb 25, 2021 8:22 am
Model of CNC Machine: Danibrum 1325 ATC Rotary 4x1

Re: Easy BoxJoint Maker 3.2

Post by BenjaminwithCNC »

Has anyone seen WoodSmiths video of Joinery?



He show a great way of making Box Joints with a TBone but Blind ones. From minute 7 onwards

You think the Gadget could do such things??

This means, the Joint is Hidden from the inside and the Outside view, but fully doable with the CNC working horizontally.

Benjamin
Attachments
Untitled.png

User avatar
jimandi5000
Vectric Wizard
Posts: 1050
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Easy BoxJoint Maker 3.2

Post by jimandi5000 »

Hi Benjamin,
This is the same joint I use on the EasyDrawerMaker gadget.

I could make a box gadget with these joints but I was thinking it is already out there.
Thanks,
Jim

User avatar
jimandi5000
Vectric Wizard
Posts: 1050
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Easy BoxJoint Maker 3.2

Post by jimandi5000 »

jimandi5000 wrote:
Fri Mar 04, 2022 6:06 pm
Hi Benjamin,
This is the same joint I use on the EasyDrawerMaker gadget.

I could make a box gadget with these joints but I was thinking it is already out there.
After reviewing my gadget, I was wrong. The EasyDrawerMaker gadget only creates the TBone joint and does not create the "Blind" TBone. I can add it as an option if you think it should be.

What are your thoughts?
Thanks,
Jim

User avatar
jimandi5000
Vectric Wizard
Posts: 1050
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Easy BoxJoint Maker 3.2

Post by jimandi5000 »

Hi Benjamin,

Is this what you are thinking?
Attachments
DrawerMenu.jpg
Thanks,
Jim

User avatar
BenjaminwithCNC
Posts: 29
Joined: Thu Feb 25, 2021 8:22 am
Model of CNC Machine: Danibrum 1325 ATC Rotary 4x1

Re: Easy BoxJoint Maker 3.2

Post by BenjaminwithCNC »

I see what you did there!

Yes that would be, what i thought about. For Drawers and Boxes.

Benjamin

Post Reply