Easy MDF Cabinet Door Maker
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hi Benjamin,
I am fixing the code and have to ask... what dose it mater on how the lines are drawn? The milling is the same. right?
I am fixing the code and have to ask... what dose it mater on how the lines are drawn? The milling is the same. right?
Thanks,
Jim
Jim
- adze_cnc
- Vectric Wizard
- Posts: 4327
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Easy MDF Cabinet Door Maker
If cutting on the line it makes no difference. My guess is the original poster is cutting to one side of the line. Two of the lines (e.g. the two top ones) will align with the panel bevel and two won't (e.g. the two bottom ones)
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hi Benjamin,
I have fixing the code as per your request.
Here is Version 10.5 of the gadget.
I have fixing the code as per your request.
Here is Version 10.5 of the gadget.
- Attachments
-
- EasyMDFDoorMaker.zip
- Rename to: EasyMDFDoorMaker.vgadget
- (974.4 KiB) Downloaded 169 times
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hello All,
I have been working on the Easy MDF Door Maker and I have added the milling of the raised panel section, mills the flat section, and mills the inter and outer door edges. It will also mills the Scribe lines if you select "Yes" to Scribe Lines and select tooling for the scribe lines. It will mill fluting lines if they are drawn and tooling is selected.
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
What is New
Clean up code and menus
Updated the Menus
Added the Raised Panel Geometry and Layers
Added Tool Profile Selection (Defaults Menu - You can select a Ball Mill, End Mill or V-Bit as the default bit profile)
Added New Tool Selection Menu
Added Make Toolpath Functions for the Geometry
Updated the User guide
SDK Note: The SDK "Create Toolpath Function" only supports the Ball Mill, End Mill and V-Bit's as usable profiles. To use other bits (Form Tool, Radiused End Mill, etc...) to create the milling, you will need to change the bit in the Toolpath. I have sent a request to the Dev team to add the other bit profiles to the Create Toolpath Function.
Please leave me some feedback . I hope you find it useful.
I have been working on the Easy MDF Door Maker and I have added the milling of the raised panel section, mills the flat section, and mills the inter and outer door edges. It will also mills the Scribe lines if you select "Yes" to Scribe Lines and select tooling for the scribe lines. It will mill fluting lines if they are drawn and tooling is selected.
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
What is New
Clean up code and menus
Updated the Menus
Added the Raised Panel Geometry and Layers
Added Tool Profile Selection (Defaults Menu - You can select a Ball Mill, End Mill or V-Bit as the default bit profile)
Added New Tool Selection Menu
Added Make Toolpath Functions for the Geometry
Updated the User guide
SDK Note: The SDK "Create Toolpath Function" only supports the Ball Mill, End Mill and V-Bit's as usable profiles. To use other bits (Form Tool, Radiused End Mill, etc...) to create the milling, you will need to change the bit in the Toolpath. I have sent a request to the Dev team to add the other bit profiles to the Create Toolpath Function.
Please leave me some feedback . I hope you find it useful.
- Attachments
-
- EasyMDFDoorMaker.zip
- (1.49 MiB) Downloaded 171 times
-
- EasyMDFDoorMaker_Ver10.7.pdf
- (1.63 MiB) Downloaded 143 times
Thanks,
Jim
Jim
-
- Vectric Wizard
- Posts: 486
- Joined: Mon Nov 06, 2017 1:57 pm
- Model of CNC Machine: Shapeoko 3D XXL
Re: Easy MDF Cabinet Door Maker
So Do I need to download yet another version listed above.
thanks Jeff Peters
thanks Jeff Peters
-
- Vectric Wizard
- Posts: 486
- Joined: Mon Nov 06, 2017 1:57 pm
- Model of CNC Machine: Shapeoko 3D XXL
Re: Easy MDF Cabinet Door Maker
any chance that there can be a video made showing how to use the program from from start to finish.with toolpaths shown
Jeff Peters
Jeff Peters
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hello All,
Making a "How To Use" video, and found an issue with the Easy MDF Door Maker. I have fixed the issues and added the milling option to mill the door in a Flat or in a Raised panel style.
Version 10.8
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
What is New
Updated the Main Menu
Added Raised Panel
Fixed some code
Please leave me some feedback. I hope you find it useful.
Making a "How To Use" video, and found an issue with the Easy MDF Door Maker. I have fixed the issues and added the milling option to mill the door in a Flat or in a Raised panel style.
Version 10.8
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
What is New
Updated the Main Menu
Added Raised Panel
Fixed some code
Please leave me some feedback. I hope you find it useful.
- Attachments
-
- EasyMDFDoorMaker.zip
- Rename to: EasyMDFDoorMaker.vgadget
- (1.76 MiB) Downloaded 144 times
-
- EasyMDFDoorMaker_Ver10.8.pdf
- (1.93 MiB) Downloaded 151 times
Thanks,
Jim
Jim
- BenjaminwithCNC
- Posts: 29
- Joined: Thu Feb 25, 2021 8:22 am
- Model of CNC Machine: Danibrum 1325 ATC Rotary 4x1
Re: Easy MDF Cabinet Door Maker
Hello Jimandi.
It took me some time to test and to get myself informed about the Scribe Lines. For them to look good, and to be correct, they are not allowed to be 4 lines in each Scribe Corner, but 2 Lines that go like this: Left one from Top to Bottom and the Right one from Bottom to Top.
I'm sorry for the late Answer but it took me some while.
Benjamin
It took me some time to test and to get myself informed about the Scribe Lines. For them to look good, and to be correct, they are not allowed to be 4 lines in each Scribe Corner, but 2 Lines that go like this: Left one from Top to Bottom and the Right one from Bottom to Top.
I'm sorry for the late Answer but it took me some while.
Benjamin
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hello All,
Made the Scribe change and it should work this time.
Version 10.9
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
What is New
Updated the Default Menu
Added Select number of Scribe Lines per Door
Please leave me some feedback. I hope you find it useful.
Made the Scribe change and it should work this time.
Version 10.9
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
What is New
Updated the Default Menu
Added Select number of Scribe Lines per Door
Please leave me some feedback. I hope you find it useful.
- Attachments
-
- EasyMDFDoorMaker.zip
- (1.76 MiB) Downloaded 176 times
-
- EasyMDFDoorMaker_Ver10.9.pdf
- (1.71 MiB) Downloaded 177 times
Thanks,
Jim
Jim
- sharkcutup
- Vectric Wizard
- Posts: 2885
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Easy MDF Cabinet Door Maker
You might want to check this too!!! Version 10.7 if you haven't already fixed it!!!
Sharkcutup
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hello All,
I have fixed the "X" button to remove a selected tool.
Thank you Sharkcutup!
Version 11.0
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
Please leave me some feedback. I hope you find it useful.
I have fixed the "X" button to remove a selected tool.
Thank you Sharkcutup!
Version 11.0
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
Please leave me some feedback. I hope you find it useful.
Last edited by jimandi5000 on Tue Apr 05, 2022 2:32 am, edited 1 time in total.
Thanks,
Jim
Jim
- sharkcutup
- Vectric Wizard
- Posts: 2885
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Easy MDF Cabinet Door Maker
Nope Vertical Scribe is the same!!! They need to be in opposite directions in order for toolpath to work correctly.
Be sure to look into my problem noted previous also in relations to the last Tool removal button. Thanks!!!
Sharkcutup
Be sure to look into my problem noted previous also in relations to the last Tool removal button. Thanks!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy MDF Cabinet Door Maker
Hello All,
I have fixed the "X" button to remove a selected tool.
Thank you Sharkcutup!
Version: 11.0
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
Please leave me some feedback. I hope you find it useful.
I have fixed the "X" button to remove a selected tool.
Thank you Sharkcutup!
Version: 11.0
The Easy Install Steps:
1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro or Aspire click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.
If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.
Please leave me some feedback. I hope you find it useful.
- Attachments
-
- EasyMDFDoorMaker.zip
- Rename to: EasyMDFDoorMaker.vgadget
- (1.76 MiB) Downloaded 142 times
Thanks,
Jim
Jim
- sharkcutup
- Vectric Wizard
- Posts: 2885
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Easy MDF Cabinet Door Maker
Have another Suggestion for you!!! Add Box Core bit to selections where Ball Nose bits are used (EX: Panel Forming). They make nice inside radius edges too!!!
Just a Thought!!!
Sharkcutup
Just a Thought!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554