My version of the holiday door hanging.
- mrmfwilson
- Vectric Craftsman
- Posts: 239
- Joined: Thu May 31, 2012 6:49 pm
- Model of CNC Machine: Legacy Arty 36
- Location: Georgetown, TX
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: My version of the holiday door hanging.
Here is my version as part of our outdoor display in snowless California
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: My version of the holiday door hanging.
Wow... both look great!!!!
Love the paint job on both and the lack of snow, Randy...
Hada bit of snow in this part of the UK last week and had an actual snowball fight!!!! The snow was short-lived... but we made the best of it.
Love the paint job on both and the lack of snow, Randy...
Hada bit of snow in this part of the UK last week and had an actual snowball fight!!!! The snow was short-lived... but we made the best of it.
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- TomWS
- Vectric Wizard
- Posts: 350
- Joined: Sat Mar 06, 2021 11:06 pm
- Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl
Re: My version of the holiday door hanging.
Nice finish in the piece! What is the base material and finish?
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: My version of the holiday door hanging.
This was some scrap wood paneling (~1/8") that had already been painted white.What is the base material and finish?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- mrmfwilson
- Vectric Craftsman
- Posts: 239
- Joined: Thu May 31, 2012 6:49 pm
- Model of CNC Machine: Legacy Arty 36
- Location: Georgetown, TX
Re: My version of the holiday door hanging.
6mm Baltic birch. Sealed it with shellac and sprayed it with Rustoleum Gold Metallic Paint+Primer. Took a few coats to get the metal smoothness. Any smooth 1/4 plywood should work fine.
Mr. Wilson
CenterLine Designs
Facebook - Centerline Designs
CenterLine Designs
Facebook - Centerline Designs
- TomWS
- Vectric Wizard
- Posts: 350
- Joined: Sat Mar 06, 2021 11:06 pm
- Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl
Re: My version of the holiday door hanging.
Oooh, my favorite paint! On one hand I was hoping that you had done it in brass, it looks that good, but knowing that you've done this is 'available' materials is even better!mrmfwilson wrote: ↑Thu Mar 25, 2021 3:31 pmSealed it with shellac and sprayed it with Rustoleum Gold Metallic Paint+Primer.
I love how that paint levels out. I use it for my metal yard art, now I have something new to try.
Thanks!