Mantel
-
- Posts: 5
- Joined: Wed Sep 19, 2018 5:48 pm
- Model of CNC Machine: Workbee & Self built 4X4 (heavy duty)
- Location: Near JOG Highlands
Mantel
Thanks to Michael Tyler, made these out of pine to start as per Michaels design and was so impressed with the result I decided to make them as a two sided project out of oak. I then made the L frames creating the profiles using A two rail sweep, a good learning curve.
I then set about the mantel itself using a length of 4" x 1" oak using a similar two rail sweep I'm sure there must be a simpler way, I then constructed the shelf using oak veneered board for the top and bottom and wrapped the profiled piece around the front and sides. I am really pleased with the result, just need to finish the rest of the fire place now.
Paul
I then set about the mantel itself using a length of 4" x 1" oak using a similar two rail sweep I'm sure there must be a simpler way, I then constructed the shelf using oak veneered board for the top and bottom and wrapped the profiled piece around the front and sides. I am really pleased with the result, just need to finish the rest of the fire place now.
Paul
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Mantel
Thank you, Paul! Your corbels and shelf in Oak look fabulous! Very clean carves!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: Mantel
Every time that you look at that, it will make you feel good.
Excellent work.
Excellent work.
“I've learned so much from my mistakes, I'm thinking of making a few more”
Re: Mantel
Plus 1, great job!Your corbels and shelf in Oak look fabulous! Very clean carves!
Gary
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Mantel
The corbels really work well in the design.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
- scotttarnor
- Vectric Wizard
- Posts: 945
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
-
- Vectric Craftsman
- Posts: 109
- Joined: Tue Jan 24, 2012 8:42 am
- Model of CNC Machine: Axiom AR8 Pro V5+Jetch Laser+Rotary
Re: Mantel
The learning curve was obviously worth it! +3
-
- Posts: 5
- Joined: Wed Sep 19, 2018 5:48 pm
- Model of CNC Machine: Workbee & Self built 4X4 (heavy duty)
- Location: Near JOG Highlands
Re: Mantel
Many thanks for all the positive comments, just need to get to grips with my own complete design.
Paul
Paul
-
- Posts: 27
- Joined: Wed Oct 07, 2020 7:39 am
- Model of CNC Machine: BZT PFE1000-PX
- Location: South of Hamburg, Germany
Re: Mantel
wow
-
- Vectric Craftsman
- Posts: 289
- Joined: Mon Dec 01, 2014 3:53 pm
- Model of CNC Machine: Homemade
Re: Mantel
+1