When selecting the color from "more colors" and assigning this color to the toolpath..... it would be handy if the color selected was remembered in the displayed pallet for the next toolpath.
Or is there a way to remember a custom color already?
Thanks
Ron
Preview - Toolpath color
-
Aussie
- Vectric Wizard
- Posts: 565
- Joined: Fri Nov 30, 2018 1:44 am
- Model of CNC Machine: Robotics Model 8
- Location: Adelaide Australia
Preview - Toolpath color
Ron
Crafers Crafts
Crafers Crafts
-
Tex_Lawrence
- Vectric Wizard
- Posts: 954
- Joined: Fri Mar 25, 2016 11:30 am
- Model of CNC Machine: Shapeoko3XXL; JTech7W; V-CarvePro 12.004
- Location: Dayton, Texas (Don't Mess With My Texas!)
Re: Preview - Toolpath color
Ron, I believe the bottom row of colors in the color pallet are saved colors that have been used. You can click on one of those to get one of the custom colors that you have used.
Tex — Crooked Wood Products
Now there's a man with an open mind – you can feel the breeze from here.
Now there's a man with an open mind – you can feel the breeze from here.
-
Aussie
- Vectric Wizard
- Posts: 565
- Joined: Fri Nov 30, 2018 1:44 am
- Model of CNC Machine: Robotics Model 8
- Location: Adelaide Australia
Re: Preview - Toolpath color
Thank you I shall look into itTex_Lawrence wrote: ↑Mon Nov 30, 2020 12:17 pmRon, I believe the bottom row of colors in the color pallet are saved colors that have been used. You can click on one of those to get one of the custom colors that you have used.
Ron
Crafers Crafts
Crafers Crafts