Another Name Sign
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Another Name Sign
Over the last 4 or 5 years I think I've made about 50 or 60 of these. They seem to be popular with friends and family and a quick and easy evening project. I had some scrap Bocote left over from a yester-year project and thought it would make a good name sign.
Steve
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: Another Name Sign
Very impressive.
“I've learned so much from my mistakes, I'm thinking of making a few more”
Re: Another Name Sign
That is beautiful. I would like to make some for my 3 grandkids. Can you provide a few details on how you created the cut file. I assume that you created a model with the Create Shop Curved Profile.
Since you have made many you have likely fine tuned the process, chosen a suitable font and ideal specs for the model.
Your help is appreciated.
Phil
Since you have made many you have likely fine tuned the process, chosen a suitable font and ideal specs for the model.
Your help is appreciated.
Phil
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Another Name Sign
Beautiful wood AND Piece Steve!!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Another Name Sign
Phil,Phil wrote: ↑Wed Nov 18, 2020 2:26 pmThat is beautiful. I would like to make some for my 3 grandkids. Can you provide a few details on how you created the cut file. I assume that you created a model with the Create Shop Curved Profile.
Since you have made many you have likely fine tuned the process, chosen a suitable font and ideal specs for the model.
Your help is appreciated.
Phil
I used "Snap ITC" for the font and adjusted the kerning. The 3D shapes were made with the "Create Shape tool". Also, I didn't use a cutout. Instead I used a "pierced" approach by using an offset boundary in the finish toolpath with a limit plane and manual tabs. It's similar to Becki's video on the two sided Marlin. It's a two part project with the name and the base as separate files. I cut the base last so I could sneek up on the slot width for a better fit. To mount the two together I used 5 minute epoxy and a small brass screw from the bottom to hold it in place while the epoxy hardened. Here is a link to the the file. You may use or change it in any way you wish. Show us some pics of your finished project.
https://drive.google.com/file/d/1KyCDDs ... sp=sharing
Steve
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Another Name Sign
Hi Steve,
Excellent work, as is usual for you! Very nice!
Excellent work, as is usual for you! Very nice!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
-
- Vectric Craftsman
- Posts: 110
- Joined: Thu Jan 08, 2009 6:24 am
- Model of CNC Machine: CAMaster Stinger SR-23
- Location: Orange, CA
Re: Another Name Sign
Hi Steve,
Really like the result. Thanks for showing and posting the files. I will try it out for sure. Also thanks for all the help with my Stinger, I think I'm going in the right direction.
Dan
Really like the result. Thanks for showing and posting the files. I will try it out for sure. Also thanks for all the help with my Stinger, I think I'm going in the right direction.
Dan
Re: Another Name Sign
Thank you, Steve. )
Phil
Phil
- Aussie
- Vectric Wizard
- Posts: 565
- Joined: Fri Nov 30, 2018 1:44 am
- Model of CNC Machine: Robotics Model 8
- Location: Adelaide Australia
Re: Another Name Sign
Very nice indeed, would love to try this and thank you for the files..... now to find the timeSteveNelson46 wrote: ↑Tue Nov 17, 2020 11:48 pmOver the last 4 or 5 years I think I've made about 50 or 60 of these. They seem to be popular with friends and family and a quick and easy evening project. I had some scrap Bocote left over from a yester-year project and thought it would make a good name sign.
Ron
Crafers Crafts
Crafers Crafts
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA