What do you do while the CNC is running?
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
What do you do while the CNC is running?
What do you do while the CNC machine is running?
Here is one of my projects:
Here is one of my projects:
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- TReischl
- Vectric Wizard
- Posts: 4653
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: What do you do while the CNC is running?
Nothing as interesting as that.
Sometimes I nap (being old lets you do that)
Other times Murphy over there decides we need to play.
Clean up shop.
Do odd things in the shop to make it more fun.
Drink coffee.
Drink coke.
Snooze.
Read the forum.
Sometimes I nap (being old lets you do that)
Other times Murphy over there decides we need to play.
Clean up shop.
Do odd things in the shop to make it more fun.
Drink coffee.
Drink coke.
Snooze.
Read the forum.
"If you see a good fight, get in it." Dr. Vernon Johns
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: What do you do while the CNC is running?
Setup or check on 3D Printer projects
Nap
Check on Vectric Forum
Setup next CNC project
Nap
Drink Coffee
Eat
Nap
Sand/Paint a project...
Nap
Check on Vectric Forum
Setup next CNC project
Nap
Drink Coffee
Eat
Nap
Sand/Paint a project...
John
Maker of Chips
Maker of Chips
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: What do you do while the CNC is running?
Walk the dogs, go out metal detecting.
I know some guys don't but I often walk away from the machine for hours at a time, to me thats half the beauty of it, doing something productive in an automated fashion.
While this was cutting today went out and found a large cent from 1835 !
I know some guys don't but I often walk away from the machine for hours at a time, to me thats half the beauty of it, doing something productive in an automated fashion.
While this was cutting today went out and found a large cent from 1835 !
Doug
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: What do you do while the CNC is running?
I have a WiFi camera with pan and zoom pointed at my CNC so I maybe away from mine, but I can check on it with my phone or computer anytime...
John
Maker of Chips
Maker of Chips
-
- Vectric Craftsman
- Posts: 114
- Joined: Wed Dec 18, 2013 10:25 am
- Model of CNC Machine: home made
Re: What do you do while the CNC is running?
I usually pray and hope nothing goes wrong with the project, other times I may plan the next project.
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: What do you do while the CNC is running?
Mow the grass, go to the store for more supplies, sit and visit with the neighbor, drink a beer
“I've learned so much from my mistakes, I'm thinking of making a few more”
Re: What do you do while the CNC is running?
I try to have other work to do in the shop;another project, complete finishing steps in the bot project, listen to something on the radio, have lunch. I don't feel OK leaving the shop for very long when the bot is running.
Phil
Phil
- Tex_Lawrence
- Vectric Wizard
- Posts: 958
- Joined: Fri Mar 25, 2016 11:30 am
- Model of CNC Machine: Shapeoko3XXL; JTech7W; V-CarvePro 12.004
- Location: Dayton, Texas (Don't Mess With My Texas!)
- Jim_in_PA
- Vectric Craftsman
- Posts: 278
- Joined: Wed Jan 10, 2018 3:24 am
- Model of CNC Machine: Camaster Stinger II SR-44 (MacOS user)
Re: What do you do while the CNC is running?
This is actually a very good question because we all have to be "in da house" while our "computer controlled shop assistants" are busy cutting out nice things. I personally work on other projects, other assemblies for the same project, other guitar builds (I do electrics as a hobby), do shop cleaning/organization, check online forums, eat lunch at my main bench, etc... Honestly, working multiple projects at one time is kinda nice because it cuts down on some of the rush which in turn, increases quality and accuracy.
-
- Vectric Apprentice
- Posts: 68
- Joined: Wed Jun 17, 2009 2:18 pm
Re: What do you do while the CNC is running?
Not to go off topic, but maybe Highpockets May consider plugging controller into WiFi outlet for his E stop
I may look into this
Jim
Geeni Surge Mini 3-Outlet Wi-Fi Smart Surge Protector No Hub Required Wireless Remote Control and Timer Works with Amazon Alexa, Google Assistant and Microsoft Cortana, Requires 2.4 GHz Wi-Fi https://www.lowes.com/pd/Geeni-Geeni-Su ... 1002794282
I may look into this
Jim
Geeni Surge Mini 3-Outlet Wi-Fi Smart Surge Protector No Hub Required Wireless Remote Control and Timer Works with Amazon Alexa, Google Assistant and Microsoft Cortana, Requires 2.4 GHz Wi-Fi https://www.lowes.com/pd/Geeni-Geeni-Su ... 1002794282
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: What do you do while the CNC is running?
Sometimes:
just watch it.
internet
Forums
work on another project
Laser engraving
Paint
sand
Cut grass
watch TV
clean shop
just watch it.
internet
Forums
work on another project
Laser engraving
Paint
sand
Cut grass
watch TV
clean shop
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- TReischl
- Vectric Wizard
- Posts: 4653
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: What do you do while the CNC is running?
We can tell Leo is not a real "old guy" yet, notice he did not mention a nap?
"If you see a good fight, get in it." Dr. Vernon Johns