We Will Do This

This is the place to post images of work produced using Aspire
User avatar
mezalick
Vectric Wizard
Posts: 2594
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: We Will Do This

Post by mezalick »

Very nice, thanks for sharing.
I think I might make a few height adjustments to the model for better sharpness.

Stay tuned.
~M
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

User avatar
scottp55
Vectric Wizard
Posts: 3749
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: We Will Do This

Post by scottp55 »

Yep, smaller bit might help Scott....
also maybe take a close look at endgrain before determining the top(?)
(One reason I like doing smalls, and cutting short material...is it gives you a better "Guess" :D )

You could always blame it on the Modeler :) :) :)
(Just HAD to Michael :) )
scott
"Go not where the path may lead;
Go instead where there is no path, and leave a Trail"
RWE

User avatar
mezalick
Vectric Wizard
Posts: 2594
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: We Will Do This

Post by mezalick »

scottp55 wrote:
Tue Mar 31, 2020 9:25 am
Yep, smaller bit might help Scott....
also maybe take a close look at endgrain before determining the top(?)
(One reason I like doing smalls, and cutting short material...is it gives you a better "Guess" :D )

You could always blame it on the Modeler :) :) :)
(Just HAD to Michael :) )
scott


LOL Scott...but I thought it was the programs fault. ( Just kidding )
The toolpath preview should show the end results.

~M
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

User avatar
scottp55
Vectric Wizard
Posts: 3749
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: We Will Do This

Post by scottp55 »

:D
Yep...NEVER My fault :wink: :wink:
I ALWAYS use the preview for various tools before I cut...I've always found Preview accurate,
and an immense help choosing bits.
MY problem is zooming Way in and watching the preview....
needs a magnifying glass to see the difference!
I'm glad the detail is there, because I! know it's there 8)

I just like razzing another Early Bird Michael :) :) :)
LOVE your detailed models!!
9.13.17 DRAGON ON MACHINE UNTOUCHED.jpg
9.13.17 DRAGON UNTOUCHED DETAILS BOTTOM 1.jpg
scott
"Go not where the path may lead;
Go instead where there is no path, and leave a Trail"
RWE

User avatar
rtibbs
Vectric Craftsman
Posts: 297
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: We Will Do This

Post by rtibbs »

Rosie.jpg
Cherry
.625 Thickness
0.0 Base Hgt.
.375 Shape Hgt.
.0312 TBN 8% SO
5hrs finish cut time :roll:

Lousy picture :cry:

martindg
Posts: 10
Joined: Thu Nov 28, 2019 6:12 am
Model of CNC Machine: Openbuilds Ox
Location: Fresno, CA

Re: We Will Do This

Post by martindg »

Thanks for posting this model Michael. Having a wife and two daughters who are hospital based nurses I found the original message inspirational, certainly, but maybe in my experience maybe just a little too subtle.
IMG_2107.JPG
[attachment=0]

User avatar
mezalick
Vectric Wizard
Posts: 2594
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: We Will Do This

Post by mezalick »

Oh yes,,,much better,
Nice cutting.
Thanks for posting

Michael
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

User avatar
scottp55
Vectric Wizard
Posts: 3749
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: We Will Do This

Post by scottp55 »

Nice cuts on both of those!! :) :)
Congrats!!
scott

My favorite RN quote/sign was;

"We're trained to Save your as#...Not kiss it!!" :D
"Go not where the path may lead;
Go instead where there is no path, and leave a Trail"
RWE

RebeccaJ
Vectric Staff
Posts: 250
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: We Will Do This

Post by RebeccaJ »

Michael this is amazing! Thank you for taking the time to model this up for everyone to use. It's super thoughtful of you and I'm sure it will put a lot of smiles on peoples faces!

Thank you :)
Beki
Senior Application Engineer - Vectric Ltd.

User avatar
mezalick
Vectric Wizard
Posts: 2594
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: We Will Do This

Post by mezalick »

Thanks Beki,,,,,you know the old saying.."Idle hands"...and so on..
I've wanted to make the Rosie model for some time.
I'm glad ( i guess ) to have had the chance and to share it.

I love what others have done with it.

Michael
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

Post Reply