New Zank Inlay 9x15 oval serving tray

An area to upload images of pieces cut using VCarve Pro
Post Reply
laflippin
Vectric Craftsman
Posts: 216
Joined: Tue Jun 12, 2018 3:07 pm
Model of CNC Machine: Axiom AR 8 Pro+
Location: Cambria, CA

New Zank Inlay 9x15 oval serving tray

Post by laflippin »

The bird is walnut and padauk and the fronds are walnut and cherry inlaid into the red oak tray.
IMG_1387.JPG

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: New Zank Inlay 9x15 oval serving tray

Post by highpockets »

WOW!

Beautiful craftsmanship! It would be a shame to put something on top of it.

Thanks for sharing....
John
Maker of Chips

Bob Reda
Vectric Wizard
Posts: 858
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: New Zank Inlay 9x15 oval serving tray

Post by Bob Reda »

Very nice, well done piece

Bob

User avatar
Todd Bailey
Vectric Staff
Posts: 623
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: New Zank Inlay 9x15 oval serving tray

Post by Todd Bailey »

Very nice... so crisp and clean!!! Well done... you should be very proud... I know I would be!

Thanks for sharing!!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: New Zank Inlay 9x15 oval serving tray

Post by scottp55 »

What a Beautiful piece Lee!!
I'm Jealous! :) :) :)
WELL Done!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
rgerding
Vectric Craftsman
Posts: 128
Joined: Mon Nov 28, 2016 7:29 pm
Model of CNC Machine: Iconic 2015
Location: Ottawa,OH

Re: New Zank Inlay 9x15 oval serving tray

Post by rgerding »

Very, very nice!! Probably look better on the wall than using it for serving.
Ron
If sawdust were gold, I'd be very rich

User avatar
Phil
Vectric Wizard
Posts: 3039
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: New Zank Inlay 9x15 oval serving tray

Post by Phil »

Beautiful! :D :D :D

Phil

woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: New Zank Inlay 9x15 oval serving tray

Post by woody53 »

That is AWESOME !!!! I get that its a serving tray, but I wouldn't serve anything but Gold on it, What a great piece of work.

Dave

Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: New Zank Inlay 9x15 oval serving tray

Post by Holzarbeiter »

Stunning.....beautiful and all the previously posted accolades as well.
A fantastic job on the inlay. I also love The contrasting woods.
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

laflippin
Vectric Craftsman
Posts: 216
Joined: Tue Jun 12, 2018 3:07 pm
Model of CNC Machine: Axiom AR 8 Pro+
Location: Cambria, CA

Re: New Zank Inlay 9x15 oval serving tray

Post by laflippin »

Thank you for all of the kind words. All praise to Paul Zank.

Post Reply