- Run a V-Bit (90° inclusive) around the part to create a 45° bevel. The External AND Internal corners should be squared/mitered. The bevel should be within the closed vector.
- Then run a straight bit (1/4") around (Comp OUTSIDE) to cut the part to size.
When I run the V-Bit along (ON) the closed vectors, all items on the CORNERS TAB of the "Profile" operation are greyed/disabled. No way to to square/miter/sharpen the internal corners. (It would be nice to be able to square/miter/sharpen the EXTERNAL/INTERNAL/ALL corners when following ON any vector.)
When I run the V-Bit compensated to the OUTSIDE, the CORNERS TAB is ENABLED, but the ALLOWANCE FOR CUTOUT TOOL is LOCKED to the same value as the CUT-DEPTH. There is no way to change this value!! Is this a *bug*? (I would think that we should be able to manually modify the ALLOWANCE FOR CUTOUT TOOL - like setting it to 0 to shift the operation inwards.) Note: The standard ALLOWANCE parameter is disabled when the SHARP INTERNAL CORNERS is checked.
With the current tools, how would you do something like this? (Preferably without having to create additional geometry. )