On my way to Area 51 in New Mexico
On my way to Area 51 in New Mexico
I saw this model on MyMiniFactory and I couldn’t resist it. The problem was, it was meant for 3-D printing, so it was hollow. I used ZBrush to slice and to fill the hollow parts, however their 2020 upgrade has a problem with the size update, so after making some parts twice, I started using Aspire to adjust the size to scale to fit against the other parts.
The size is 20-inches long by 15-inch high. I applied Bronze metal coating. Since my plans were to coat it, I just used a 2 x 10 and a 4 x 8 Douglas fir which gave me better strength than using MDF.
Gary
The size is 20-inches long by 15-inch high. I applied Bronze metal coating. Since my plans were to coat it, I just used a 2 x 10 and a 4 x 8 Douglas fir which gave me better strength than using MDF.
Gary
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: On my way to Area 51 in New Mexico
WOW!!! Great job...
Thanks for sharing....
Thanks for sharing....
John
Maker of Chips
Maker of Chips
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: On my way to Area 51 in New Mexico
Nice job Gary.
Unless I'm missing something here, I think Area 51 is in Nevada.
Unless I'm missing something here, I think Area 51 is in Nevada.
Steve
Re: On my way to Area 51 in New Mexico
No wonder I got lost.Unless I'm missing something here, I think Area 51 is in Nevada.
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: On my way to Area 51 in New Mexico
You think YOU got lost...what about those poor ET’s?
(Great job on the project, Gary!)
(Great job on the project, Gary!)
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: On my way to Area 51 in New Mexico
That looks great... The metal coating makes it.
-
- Vectric Craftsman
- Posts: 216
- Joined: Sat Feb 03, 2018 2:03 am
- Model of CNC Machine: diy 4 X 4 CNC Router
- Location: So. Cal.
Re: On my way to Area 51 in New Mexico
Whats the name of that stl please?
mark-s
mark-s
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: On my way to Area 51 in New Mexico
Wonderfully detailed Gary..and Big!
NICE job!
scott
NICE job!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- TReischl
- Vectric Wizard
- Posts: 4657
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: On my way to Area 51 in New Mexico
Fan-freaking-tastic!!!!!
"If you see a good fight, get in it." Dr. Vernon Johns
-
- Posts: 2
- Joined: Wed Oct 25, 2017 6:47 pm
- Model of CNC Machine: CNC Pro
Re: On my way to Area 51 in New Mexico
I live in Roswell, NM. If any CNC users ever get lost and fine themselves headed this way, give me a text, and I'll give you a guided tour while I pick your brain! TFS_Roswell@hotmail.com
- mfirlott
- Vectric Craftsman
- Posts: 299
- Joined: Thu Feb 07, 2013 12:49 am
- Model of CNC Machine: Stinger 1 (2014)
- Location: Cantley, Quebec, Canada
- Contact:
Re: On my way to Area 51 in New Mexico
Beautiful piece of work. Looks amazing and slightly scary at the same time. How many slices did this take? And did you do 1-sided or 2-sided slices? Thanks...
(Mitch)
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
Re: On my way to Area 51 in New Mexico
Thanks for all the compliments.
When Toys and Trifles posted, that's when I remembered there were Aliens in New Mexico.
Gary
MyMiniFactory: Sahuagin_04Whats the name of that stl please?
mark-s
It was about 24 different slices. Because it was hollow, I had to take it into ZBrush to fill each piece. The problem I had was ZBrush's size update has a bug so after making several parts twice, I started resizing in Aspire to the part I made previously. Everything was a double-sided cut.How many slices did this take? And did you do 1-sided or 2-sided slices?
When Toys and Trifles posted, that's when I remembered there were Aliens in New Mexico.
Gary