2020 User Group Meeting - San Diego

Post general information and questions relating to Cut2D in this Forum.
Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

2020 User Group Meeting - San Diego

Post by Stephanie Downing »

Firstly, we would like to thank all our 2019 attendees, partners and guest speakers for making last years’ User Group Meeting the best yet!

With that in mind we couldn’t wait to share with you the dates and location of our next User Group Meeting. We’re delighted to announce that the 2020 User Group Meeting will be held at the DoubleTree by Hilton San Diego hotel on Friday 25th and Saturday 26th September 2020.

We'll be packing both days full covering; ‘What's New’ in version 10.5 along with projects and ideas to increase your knowledge and efficiency using the software. As well as the technical benefits, the User Group Meeting gives like-minded CNC enthusiasts the opportunity to get together, showcase their projects and share knowledge.

As with previous meetings, the meeting will take place over two days and will have a strong focus on our Aspire and VCarve software with some of the sessions also being relevant to Cut2D.

The fee per person to attend is $249.00, which includes refreshments and lunch throughout both days as well as a welcome pack, access to all of the presentations and a free gift.

To help minimise costs, we have made arrangements with the DoubleTree by Hilton San Diego hotel to offer a discounted accommodation rate of $159 per night (please note, this room rate excludes breakfast. Breakfast can be added for an additional $20 at the hotel is you choose). Room availability is limited, to book your room at the discounted rate click the link below:
https://book.passkey.com/event/50049717 ... 10710/home


**BOOK YOUR PLACE**
https://www.vectric.com/vectric-communi ... oupMeeting

Take a look at the agenda and comments from our attendees for our 2019 User Group Meeting in Denver here:
http://forum.vectric.com/viewtopic.php? ... ng#p239892

We are looking forward to seeing you all in San Diego for another exciting User Group Meeting.

The Vectric Team.
Attachments
400x400_UGM_Logo_2020.jpg

User avatar
gkas
Vectric Wizard
Posts: 1450
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: 2020 User Group Meeting - San Diego

Post by gkas »

Booked & Booked.... Definitely looking forward to this UGM. We had a great time last year. :D The drive's shorter, too. Southern California Orange County to San Diego - 2 hours, tops.

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2020 User Group Meeting - San Diego

Post by Stephanie Downing »

Hi Gerry,

That's great to hear! We are looking forward to seeing you at the event this September. It will come around so fast now :)

We're looking forward to another fantastic event.

See you soon!

User avatar
jimandi5000
Vectric Wizard
Posts: 1050
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: 2020 User Group Meeting - San Diego

Post by jimandi5000 »

Look for me there... I will start packing a bag. :) Just as soon as I talk the wife in to it. ;)
Thanks,
Jim

User avatar
SteveNelson46
Vectric Wizard
Posts: 2282
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: 2020 User Group Meeting - San Diego

Post by SteveNelson46 »

I'm also booked for the meeting and the hotel. I really wanted to attend last year's UGM but just couldn't swing it. So, I'm really looking forward to this one.

EDIT: Why is this thread in the Cut2D section?
Steve

honesttjohn
Posts: 39
Joined: Thu May 14, 2015 10:24 pm
Model of CNC Machine: Probotix Nebula & CNCRP Pro4848
Location: North Detroit Burbs

Re: 2020 User Group Meeting - San Diego

Post by honesttjohn »

I'm in!! Got meeting and hotel booked. Steph, Paypal charged me 6% Michigan sales tax. Is that right??

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2020 User Group Meeting - San Diego

Post by Stephanie Downing »

honesttjohn wrote:I'm in!! Got meeting and hotel booked. Steph, Paypal charged me 6% Michigan sales tax. Is that right??
Hi John,

Our payment provider (fastspring) automatically apply any relevant sales tax due for your state and pass it on to the relevant authorities. Unfortunately we have no control over the sales tax charged in each state.

Sorry about that! I hope it helps.

Thanks
Stephanie

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2020 User Group Meeting - San Diego

Post by Stephanie Downing »

SteveNelson46 wrote:I'm also booked for the meeting and the hotel. I really wanted to attend last year's UGM but just couldn't swing it. So, I'm really looking forward to this one.

EDIT: Why is this thread in the Cut2D section?
Great news! We're looking forward to seeing you again this year!

The event is an announcement so gets posted in all topics on the forum :)

Thanks
Stephanie

User avatar
MarkL
Posts: 32
Joined: Sun Nov 30, 2014 9:35 am
Model of CNC Machine: Avid 4848 Pro CNC
Location: Southern Oregon, USA
Contact:

Re: 2020 User Group Meeting - San Diego

Post by MarkL »

I'm really trying to go to this UGM. I'm just hoping the rooms will still be available next week (come on, payday!) If so, it looks like I'll be able to go.

I can't wait!
Double check, triple check, measure, measure, cut...

MarkLindsayCNC

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: 2020 User Group Meeting - San Diego

Post by highpockets »

Hotel and UGM reservations made. Looking forward to the meeting....
John
Maker of Chips

User avatar
MarkL
Posts: 32
Joined: Sun Nov 30, 2014 9:35 am
Model of CNC Machine: Avid 4848 Pro CNC
Location: Southern Oregon, USA
Contact:

Re: 2020 User Group Meeting - San Diego

Post by MarkL »

Everything is booked and confirmed. See you all in San Diego!

I can't wait! 8)
Double check, triple check, measure, measure, cut...

MarkLindsayCNC

User avatar
scotttarnor
Vectric Wizard
Posts: 941
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: 2020 User Group Meeting - San Diego

Post by scotttarnor »

Everything booked! Can not wait to meet all the helpful individuals on the forum!
Scott T

@scottscnc

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: 2020 User Group Meeting - San Diego

Post by Rcnewcomb »

I'm registered. I can actually drive to this one if I wish.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
scubanimal
Vectric Craftsman
Posts: 152
Joined: Tue Mar 12, 2013 9:16 pm
Model of CNC Machine: Stinger1 24, Shark HD2 Pro, Aspire,
Location: San Diego

Re: 2020 User Group Meeting - San Diego

Post by scubanimal »

I'm booked! I feel like I won the lottery, this is great! No traveling, no hotels.... just parking ...
Really like the location in the valley verses downtown.

That is still a healthy drive Randall,

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2020 User Group Meeting - San Diego

Post by Stephanie Downing »

It's so great to have so many of you on board already :)

The response to San Diego has been fantastic.

We can't wait to see everyone again that has attended previously and to meet everyone attending one of our User Group Meetings for the first time!

We've already started preparing our talks. Watch this space for regular updates on what you lucky people are in store for this year :D

Post Reply