Laguna Swift Down

Post Reply
jay pieper
Vectric Apprentice
Posts: 90
Joined: Sat Apr 01, 2017 4:39 pm
Model of CNC Machine: laguna swift 4x4
Location: Shawano Wisconsin

Laguna Swift Down

Post by jay pieper »

I know this is the wrong forum for this post but I will use it anyway. I am running a Laguna Swift 4x4 CNC
My HHC went dead and had to replace. Got the new controller and needed to download the data.bac to
the controller. Got emailed the data.bac from Laguana and found out it was the wrong one for my machine,
that was a week ago and can't get them to respond. I am wondering if someone has the data,bac for my
cnc. The cnc is about 3 years old.

DESPERATE IN WISCONSIN

chemstock
Posts: 5
Joined: Wed Sep 18, 2019 2:05 am
Model of CNC Machine: laguna swift 4x8

Re: Laguna Swift Down

Post by chemstock »

I have a Laguna Swift 4x8 with the 3HP spindle, the Richauto A18E controller. The only real difference should be the Y table limits and the max speed on the spindle (18,000 RPM) provided you that you use the a18e controller. The A18E is the one used for 4th axis work.
Let me know if this helps
Chris Hemstock

jay pieper
Vectric Apprentice
Posts: 90
Joined: Sat Apr 01, 2017 4:39 pm
Model of CNC Machine: laguna swift 4x4
Location: Shawano Wisconsin

Re: Laguna Swift Down

Post by jay pieper »

Chris thanks for the reply
I run the a11e controller with my swift. I am back up and running

Post Reply