Here's a few examples of what you can do with the new Version 10 with the VCarve toolpath option.
Using your own vectors opens a wide range of possibilities.
If you want to see more, here are the links to some short videos.
Hitch
Fish
Enjoy,
Michael
VCarve Version 10 - Photo V-Carve toolpath
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
VCarve Version 10 - Photo V-Carve toolpath
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: VCarve Version 10 - Photo V-Carve toolpath
Please Note:
Michael of course meant - VCarve Version 10 - Photo V-Carve toolpath,
not PhotoVCarve V10.
There is no version 10 of PhotoVCarve.
Cheers,
Mark.
Michael of course meant - VCarve Version 10 - Photo V-Carve toolpath,
not PhotoVCarve V10.
There is no version 10 of PhotoVCarve.
Cheers,
Mark.
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: VCarve Version 10 - Photo V-Carve toolpath
Thanks Mark,
It's what I ment to say.
The Toolpath option in the VCarve and Aspire Version 10....
Michael
It's what I ment to say.
The Toolpath option in the VCarve and Aspire Version 10....
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: VCarve Version 10 - Photo V-Carve toolpath
Thanks Michael!!
"FISH" is bookmarked for when caffeinated tomorrow
Looks interesting!
scott
"FISH" is bookmarked for when caffeinated tomorrow
Looks interesting!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: VCarve Version 10 - Photo V-Carve toolpath
Having just upgraded to Aspire 10, tell me why I recently purchased PhotoVcarve
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: VCarve Version 10 - Photo V-Carve toolpath
Probably because like me you forgot to clean your crystal ballrtibbs2018 wrote:Having just upgraded to Aspire 10, tell me why I recently purchased PhotoVcarve
Thanks Michael, never could get the hang of photovcarve, hoping these may help