Cat Exercise Wheel (Large Hamster Wheel)

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
sharkcutup
Vectric Wizard
Posts: 2912
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Cat Exercise Wheel (Large Hamster Wheel)

Post by sharkcutup »

Optimized-Cat Exercise Wheel 8.jpg
Displays in correct orientation when clicked on. (Not exactly sure why it displays it here 90 degrees off)

I cut this and built it within the last three days using my CNC for the critical parts and a table saw and miter saw for the balance of parts. Stands 46" tall, 12" deep walkway on wheel (Roller base is 19.25" deep x 34" wide.

Plan on Lining the walkway with some carpet for the masonite board is a little slippery even for a cat with nails!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.004

User avatar
gkas
Vectric Wizard
Posts: 1451
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: Cat Exercise Wheel (Large Hamster Wheel)

Post by gkas »

Do you expect a cat to run on a wheel? :shock:

User avatar
TReischl
Vectric Wizard
Posts: 4642
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: Cat Exercise Wheel (Large Hamster Wheel)

Post by TReischl »

gkas wrote:Do you expect a cat to run on a wheel? :shock:
Oh, that is easy, just get a mouse to run on it first.
"If you see a good fight, get in it." Dr. Vernon Johns

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Cat Exercise Wheel (Large Hamster Wheel)

Post by highpockets »

John
Maker of Chips

User avatar
gkas
Vectric Wizard
Posts: 1451
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: Cat Exercise Wheel (Large Hamster Wheel)

Post by gkas »

gkas wrote:Do you expect a cat to run on a wheel? :shock:
OK... I'm thoroughly chastised.. :oops: :oops: ...I didn't know that a cat could get that bored :D :D

Post Reply