Attached are some photos of Clayton Boyer's Steampunk Impulse engine.
The .dxf files were purchased from Clayton Boyer's website
The following link will show you one in operation:
I just finished assembling mine and have some "fine tuning" to get it fully operational. I think I have too much drag on some of the components which don't allow it to run continuously.
For those of you who like gears & things
Steampunk Impulse Engine
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Steampunk Impulse Engine
That looks fantastic, Ron! I love the contrasting wood.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- TReischl
- Vectric Wizard
- Posts: 4655
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Steampunk Impulse Engine
WE WANT VIDEO! WE WANT VIDEO! . . . .
That is very cool, beautifully done. Gotta love things with gears.
That is very cool, beautifully done. Gotta love things with gears.
"If you see a good fight, get in it." Dr. Vernon Johns
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: Steampunk Impulse Engine
Finally got things ironed out. My mind is really on the Hurricane as I live in FloridaTReischl wrote:WE WANT VIDEO! WE WANT VIDEO! . . . .
https://www.dropbox.com/sh/3f4tdyxkz5pa ... ERYaa?dl=0
Gotta shorten up the counterbalance lead
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Steampunk Impulse Engine
NEAT Ron!!
Looks good AND works
Try to stay dry!!!
scott
Looks good AND works
Try to stay dry!!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Steampunk Impulse Engine
Sweet! Moving wood is fun to watch as long as it's not set in motion by a hurricane.