I have a Crv-file created with moulding toolpath, but these toolpaths doesn´t allow raster x but cuts instead around A-axis and when I try to run this offline, the prosess run very slow.
My problem is that I have only Vcarve pro and can´t export this file as an STL for importing it again for a different toolpath calculation.
Are there anybody here who can help me with converting this file and post it here so I can try another option in order to get a faster prosess?
Convert a Crv-file to STL?
- jaru-eri
- Vectric Craftsman
- Posts: 189
- Joined: Fri Feb 06, 2009 3:11 am
- Model of CNC Machine: Taig and router, Gecko G540, Mach3
- Location: Norway
Re: Convert a Crv-file to STL?
I forgot to upload an image. Here it is:
Re: Convert a Crv-file to STL?
Try this one.Are there anybody here who can help me with converting this file and post it here so I can try another option in order to get a faster prosess?
Gary
- Attachments
-
- sphere 92mm.zip
- (58.23 KiB) Downloaded 166 times
- jaru-eri
- Vectric Craftsman
- Posts: 189
- Joined: Fri Feb 06, 2009 3:11 am
- Model of CNC Machine: Taig and router, Gecko G540, Mach3
- Location: Norway
Re: Convert a Crv-file to STL?
Thank you Gary. This I really appreciated.
- adze_cnc
- Vectric Wizard
- Posts: 4324
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Convert a Crv-file to STL?
If you just want a 92mm diameter sphere--without the attached "flanges"--try this model. You could then add your own 3D tabs to it. Just import the .3DM file as you would a .STL model.
Steven
Steven
- Attachments
-
- 92mm-sphere.zip
- 92mm diameter sphere (Rhinoceros v5)
- (158.19 KiB) Downloaded 71 times