Repurposed Bling Box

This forum is for general discussion about Aspire
Post Reply
Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Repurposed Bling Box

Post by Holzarbeiter »

The purpose of this post is not to show the box I cut as I did nothing but run the files created by Michael Tyler and simply assemble the pieces.

The purpose of the post is to say a heartfelt thank you to Michael Tyler
for his time, talent and willingness to share each of those with the members of the Vectric forum.

I used Michael’s bling box to make an urn for my father in law who passed away in early May. Needless to say,
The family was quite touched with such a beautiful box and the cost savings versus a ”funeral home” urn were significant.

So to Michael I say THANK YOU!
It doesn’t seem quite enough. Perhaps one day I will have the pleasure of being able to thank you in person, but until such time this will
Have to do.

Joe
Attachments
bling box_edited-1.jpg
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Repurposed Bling Box

Post by scottp55 »

Beautiful box Joe!!
Making it yourself makes all the difference!
Condolences to you and yours!
Well Done Sir
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Repurposed Bling Box

Post by highpockets »

Beautiful work indeed!
Sorry you had a need, but as Scott said, it means much more because you made it.

Thanks for sharing!
John
Maker of Chips

User avatar
mtylerfl
Vectric Archimage
Posts: 5892
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Repurposed Bling Box

Post by mtylerfl »

Holzarbeiter wrote:...So to Michael I say THANK YOU!
It doesn’t seem quite enough. Perhaps one day I will have the pleasure of being able to thank you in person, but until such time this will
Have to do.

Joe
Hi Joe,

Thank you very much for your kind words. It will be my pleasure if/when we meet in person someday.

Thank you for sharing the photo of the completed urn. You did a marvelous job and the finish is beautiful! I'm glad to know you were able to use the project to make your family such a meaningful memorial in honor of your father-in-law.
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Repurposed Bling Box

Post by Holzarbeiter »

Thanks all for your comments and kind words.
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

User avatar
martin54
Vectric Archimage
Posts: 7349
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Repurposed Bling Box

Post by martin54 »

Sorry but I have to disagree with some of what you have said, to me it is only partly true & I think you have done yourself an injustice Joe, I understand what you have said about running the files & assembleing the pieces BUT you still had to finish it once made & it looks like you have done a very good job of doing that :lol: :lol:

Finishing is where I fall over the most, even one of Michael's excellent creations can look bad if not finished properly :lol: :lol:

Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Repurposed Bling Box

Post by Holzarbeiter »

Thank you, Martin. Finishing is certainly not my strong point. In fact, its my least favorite part of wood working.
A necessary evil though...kinda like sanding. :D
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: Repurposed Bling Box

Post by Creation in Wood »

Very nice box. Thanks for sharing
Thank You
Doug

Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Repurposed Bling Box

Post by Holzarbeiter »

Thank you, Doug. I have looked enviously at some of the beautiful stuff you have posted.
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

Post Reply