More Rotary Tests

Topics related to wrapped rotary machining in Aspire or VCarve Pro
Post Reply
User avatar
Rcnewcomb
Vectric Wizard
Posts: 3742
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

More Rotary Tests

Post by Rcnewcomb »

Each one cuts in under 20 minutes. The natural wood one (poplar) cut in 5 minutes.

The finish on the white columns is Rustoleum Multi-color texture (rattle can). The wood underneath is redwood.
Attachments
IMG_0660 (2).jpg
IMG_0665 (2).jpg
- Randall Newcomb

User avatar
mtylerfl
Vectric Wizard
Posts: 4377
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: More Rotary Tests

Post by mtylerfl »

I’m enjoying seeing your rotary experiments, Randall! You’re paving the way!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Bobtail Farm
Vectric Craftsman
Posts: 147
Joined: Mon Dec 01, 2014 3:53 pm
Model of CNC Machine: Homemade

Re: More Rotary Tests

Post by Bobtail Farm »

+1

User avatar
Rcnewcomb
Vectric Wizard
Posts: 3742
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: More Rotary Tests

Post by Rcnewcomb »

Today I was using 16" long 2x2 redwood pieces. I can now go from a square blank to a finished item in under 8 minutes.
Attachments
IMG_0679.jpg
IMG_0680.jpg
IMG_0681.jpg
- Randall Newcomb

User avatar
Rcnewcomb
Vectric Wizard
Posts: 3742
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: More Rotary Tests

Post by Rcnewcomb »

A pair of small legs in redwood. Total machine time: 48 minutes.
Attachments
IMG_0684.jpg
IMG_0687.jpg
- Randall Newcomb

User avatar
WNC_Ed
Vectric Craftsman
Posts: 263
Joined: Fri Dec 07, 2018 5:56 pm
Model of CNC Machine: Shark HD4 AXYZ 4010
Location: Western North Carolina - Heart of the Smokies

Re: More Rotary Tests

Post by WNC_Ed »

Wow, looks great.
I would call that a successful test.
Maker of sawdust

User avatar
Rcnewcomb
Vectric Wizard
Posts: 3742
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: More Rotary Tests

Post by Rcnewcomb »

All started with a 16" 2x2.
Criss-cross spirals (under 7 minutes), and 3D with some coves and flutes (under 20 minutes)
Attachments
IMG_0690.jpg
IMG_0692.jpg
IMG_0693.jpg
IMG_0694.jpg
- Randall Newcomb

User avatar
TReischl
Vectric Wizard
Posts: 3156
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset
Location: Leland NC

Re: More Rotary Tests

Post by TReischl »

We will be expecting a full tutorial complete with videos and pdf file from you in the near future.

Nice work!
"If you see a good fight, get in it." Dr. Vernon Jones

Post Reply