Greetings,
I recently received a note about the presentation that Edward gave at the Chicago UGM.
It was about making a puzzle.
The question that was asked is "was there a second video to be included with the thumb drive" as stated by Edward?
Since I was not there I could not answer but I though I would ask here...
If so, where could it be found.
Thanks
Michael
Chicago UGM
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Chicago UGM
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Adrian
- Vectric Archimage
- Posts: 14680
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Chicago UGM
There is only one jigsaw video on the UK UGM thumb drive but I know the US one is sometimes different as it's two days rather than one. Not sure what the 2nd video would be about as the 1st one covers everything.
- martin54
- Vectric Archimage
- Posts: 7353
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Chicago UGM
As Adrian has said the UK user group meeting is only the one day so things may have been different over there
Edward did indeed mention 2 tutorials at our meeting, one was on making a jigsaw puzzle & the other was about using the embossing tool, as there was only time for one presentation he went through the jigsaw puzzle presentation & left us to view the embossing tool presentation t a latter time
That might be where the idea of 2 presentations came from
Edward did indeed mention 2 tutorials at our meeting, one was on making a jigsaw puzzle & the other was about using the embossing tool, as there was only time for one presentation he went through the jigsaw puzzle presentation & left us to view the embossing tool presentation t a latter time
That might be where the idea of 2 presentations came from
- Adrian
- Vectric Archimage
- Posts: 14680
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Chicago UGM
Martin jogged the old grey cells. We had to vote at the UK UGM to choose which presentations we wanted to see as there wasn't time for both.
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Chicago UGM
Thanks Guys,
I got it figured out.
Maybe the UK meeting should be longer ??
Michael
I got it figured out.
Maybe the UK meeting should be longer ??
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- martin54
- Vectric Archimage
- Posts: 7353
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Chicago UGM
So what was the answer Michael ? Not being at the user group meeting over there I don't know what was saidmezalick wrote:Thanks Guys,
I got it figured out.
Maybe the UK meeting should be longer ??
Michael
While I would like the UK meeting to be longer I am not sure it would actually work well, the UK is not a big Counry so numbers are nothing like those across the pond, sure if they made it 2 days the numbers would drop a bit as well because there will be people who can't spare the time from work or the cost of an overnight stay.
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Chicago UGM
Martin,
"Got it figured out" may have been the incorrect choice of words.
It was played again and it ran the entire time as expected....
So, bottom line is that the one video is all that was needed.
Michael
"Got it figured out" may have been the incorrect choice of words.
It was played again and it ran the entire time as expected....
So, bottom line is that the one video is all that was needed.
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com