Need help creating a model.

This section is for useful tips and tricks for Aspire
Post Reply
nortonalta
Posts: 3
Joined: Sun Feb 05, 2017 4:35 pm
Model of CNC Machine: CanCam Desktop 23

Need help creating a model.

Post by nortonalta »

Good Morning;

I'm fairly new to the forum. This is my first post.
A friend has asked me to make a sign for his future son in law. the bitmap i'm to use is business card size( we know how well that works) I've looked online, but that is the biggest I can find. So I've rebuilt the design, but that's where I'm hitting the wall. It will be 24 inches.
I'm hoping someone can help me out with the creating of a model, I'm willing to pay

Brian
Attachments
Mr.Barber+Logo.png
Mr.Barber+Logo.png (6.73 KiB) Viewed 1678 times

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Need help creating a model.

Post by highpockets »

First off, I'd work on my online search skills. I found this image in 30 seconds.
640 x 640
640 x 640
You don't say what exactly your problem is or what you're trying to do with the image. Are you looking for to create a vcarve or 2.5D image? Need more information to help.
John
Maker of Chips

User avatar
FixitMike
Vectric Wizard
Posts: 2173
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (retired)
Location: Burien, WA USA

Re: Need help creating a model.

Post by FixitMike »

Would this do? I would need to find out how you wish to handle the tie areas. Contact me at mike-at-lyndamike.com (delete the hyphens).
Mr. Barber.JPG
Could be painted like this.
Could be painted like this.
Good judgement comes from experience.
Experience comes from bad judgement.

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Need help creating a model.

Post by highpockets »

You have Aspire, you could also do a 2.5D
Image 001.png
John
Maker of Chips

nortonalta
Posts: 3
Joined: Sun Feb 05, 2017 4:35 pm
Model of CNC Machine: CanCam Desktop 23

Re: Need help creating a model.

Post by nortonalta »

Hi Gentlemen

Thanks for the quick response.
I did the upgrade to Aspire, a couple months ago, but haven't had much time to play with it.

The picture in my head is as follows. The high point of the model would be the MR.BARBER/Scissors (i have the 3D scissors). Next would be the tie, then the black parts. I don't need the Est 2009. The lines for the tie could just be v-bit lines to separate the colors. The customer will be painting himself.

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Need help creating a model.

Post by highpockets »

Something like this?
Mr Barber 2.5D remodeled.png
John
Maker of Chips

Post Reply