New handle for old saw

This is the place to post images of work produced using Aspire
Post Reply
BillK
Vectric Craftsman
Posts: 229
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

New handle for old saw

Post by BillK »

This is a new saw handle that I made. I did the basic design in other software, this was my first time using that software and I did the basic shape and radii there and saved it as an STL. I then imported that STL into Aspire and I used the two-sided machining feature to complete the design by adding the finger grips, an indent for the index finger, and my logo.

This is a Richardson Bros. of Newark, NJ saw that was manufactured between 1878 and 1890. The blade still has plenty of life. The original handle had a crack in it with a nail holding it together. I will keep that around.
Making one of these by hand is a long process. 45 minutes or so of CNC carving got me about 90% of the way.

Next, I have to work on a saw vice so I can sharpen this.
handle toplr.jpg
handle bottomlr.jpg
finger griplr.jpg
BillK
https://www.facebook.com/CarvingsByKurtz

User avatar
jarm2
Vectric Craftsman
Posts: 177
Joined: Wed Jun 13, 2012 9:16 pm
Model of CNC Machine: C&CNC electronics
Location: Harpster, Idaho

Re: New handle for old saw

Post by jarm2 »

Very nicely done. I have a good saw with a plastic handle and will use your idea to make a new handle out of wood. Great idea.
Vectric Aspire, Cut3D, VCarve Pro, AutoCAD lite, Draftsight, Corel Draw X6, ViaCAD Pro 9, W 10

User avatar
scottp55
Vectric Wizard
Posts: 3430
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: New handle for old saw

Post by scottp55 »

Looks VERY comfortable and easy to control...Well Done Bill! :D
LIKING it!
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

User avatar
mtylerfl
Vectric Wizard
Posts: 4370
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: New handle for old saw

Post by mtylerfl »

I like this idea! I have two saws that could use nice handles like that. Thank you for your inspiration!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

BillK
Vectric Craftsman
Posts: 229
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Re: New handle for old saw

Post by BillK »

Thanks all. I have 2 or 3 other saws in line for handle replacement. May try a plane tote next though. :D
BillK
https://www.facebook.com/CarvingsByKurtz

Bobtail Farm
Vectric Craftsman
Posts: 147
Joined: Mon Dec 01, 2014 3:53 pm
Model of CNC Machine: Homemade

New handle for old saw

Post by Bobtail Farm »

inspirational the finger indents.

BillK
Vectric Craftsman
Posts: 229
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Re: New handle for old saw

Post by BillK »

Bobtail Farm wrote:inspirational the finger indents.
Yes, they give it a nice comfortable feel.
BillK
https://www.facebook.com/CarvingsByKurtz

Coogara
Posts: 35
Joined: Tue Mar 05, 2013 7:58 pm
Model of CNC Machine: ShopBot Desktop
Location: Strathfieldsaye, Australia

Re: New handle for old saw

Post by Coogara »

It's nice to make something that's practical, and useful in the shed no less. Nice job. Handy finger positions.
Graeme Chandler (Australia)
ShopBot Desktop
Aspire 8

User avatar
Bob Jr
Vectric Wizard
Posts: 329
Joined: Thu Aug 13, 2009 2:13 am
Model of CNC Machine: Axiom, Shark

Re: New handle for old saw

Post by Bob Jr »

Bill,
That's one slick handle!
There's a great supply of old saws at our local ReStore. I'll go pick through them and start re-handling a couple.
One question... How did you make such a neat, thin cut into the exact center of the handle in order to insert the blade?
Bob
hammer...nails...stuff

BillK
Vectric Craftsman
Posts: 229
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Re: New handle for old saw

Post by BillK »

Bob Jr. :

Thanks. I was worried about that cut before I made it. I started by marking and drilling the holes for the saw nuts first. Then I lined it up and cut into the deepest part near the top with a bandsaw with a fence which put me pretty much perfectly on center. It was enough to then use a tenon saw (back saw) to make the full cut to depth. It was a little tight on the blade, so I have a cross cut saw that had a good set and matched the blade width to clean it out to a good fit. Just made it deep enough so that all the holes in the handle line up with the holes in the blade. It helped to have the old handle also.
BillK
https://www.facebook.com/CarvingsByKurtz

User avatar
Bob Jr
Vectric Wizard
Posts: 329
Joined: Thu Aug 13, 2009 2:13 am
Model of CNC Machine: Axiom, Shark

Re: New handle for old saw

Post by Bob Jr »

Thank you Bill,
It's funny how what seems like the easiest part of a job can be the most distracting for me.
Thank you for your help.
Bob
hammer...nails...stuff

Post Reply