Redgum floating shelf with live edge

This is the place to post images of work produced using Aspire
Coogara
Posts: 35
Joined: Tue Mar 05, 2013 7:58 pm
Model of CNC Machine: ShopBot Desktop
Location: Strathfieldsaye, Australia

Redgum floating shelf with live edge

Post by Coogara »

Small floating shelf in Australian Redgum with live edge. Finished with Minwax wipe-on poly.

Top panel is mountain scene from Design & Make. Bottom panel is the ivy texture that comes with Aspire.

Mounted using commercial brackets.
Attachments
01.jpg
02.jpg
03.jpg
04.jpg
05.jpg
Graeme Chandler (Australia)
ShopBot Desktop
Aspire 8

Savannahdan
Vectric Wizard
Posts: 396
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Redgum floating shelf with live edge

Post by Savannahdan »

Bet you had fun cutting the boards and putting the shelf system together. Really nice.

User avatar
dwilli9013
Vectric Wizard
Posts: 1232
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Redgum floating shelf with live edge

Post by dwilli9013 »

Very nice work. Especially like the texturing throughout. Thanks for sharing. :lol: :lol:
D-Dub
Dwayne
Dwilli

User avatar
WNC_Ed
Vectric Craftsman
Posts: 266
Joined: Fri Dec 07, 2018 5:56 pm
Model of CNC Machine: Shark HD4 AXYZ 4010
Location: Western North Carolina - Heart of the Smokies

Re: Redgum floating shelf with live edge

Post by WNC_Ed »

Looks great.
And functional too.
Well done!
Maker of sawdust

Coogara
Posts: 35
Joined: Tue Mar 05, 2013 7:58 pm
Model of CNC Machine: ShopBot Desktop
Location: Strathfieldsaye, Australia

Re: Redgum floating shelf with live edge

Post by Coogara »

Positioning of the back boards was complicated by the step created by the tiles, above which the shelf is positioned. Additionally, the project was rather drawn out after needing to replace collet and collet nut due to a bit partially (and repeatedly) dropping out of the collet, gouging into the spoil board. It only happened on profile cutout, but potentially losing hours of work was unappealing, so had to await replacement parts.
Graeme Chandler (Australia)
ShopBot Desktop
Aspire 8

User avatar
Todd Bailey
Vectric Staff
Posts: 257
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: Redgum floating shelf with live edge

Post by Todd Bailey »

Really like that one.

Thanks for sharing!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Savannahdan
Vectric Wizard
Posts: 396
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Redgum floating shelf with live edge

Post by Savannahdan »

I had something similar when cutting some spalted persimmon a month ago. Although in my case the bit went into the 3d carving that had taken a few hours to cut. After the bit took a dive I saw that the collet nut was in pretty bad shape on the inside and I could tell it wasn't going to hold a collet properly. Ordered replacement parts from Precise Bits. How does the red gum cut compared to other woods, like oak, maple and walnut?

User avatar
adze_cnc
Vectric Apprentice
Posts: 857
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Redgum floating shelf with live edge

Post by adze_cnc »

I like the applied Quick-Grip clamp decoration.

Coogara
Posts: 35
Joined: Tue Mar 05, 2013 7:58 pm
Model of CNC Machine: ShopBot Desktop
Location: Strathfieldsaye, Australia

Re: Redgum floating shelf with live edge

Post by Coogara »

I kind of liked the 'industrial' look of the clamps but conceded they couldn't stay :)

I love working with Redgum. It's a very hard hardwood.

Our Tasmanian Oak is probably similar to your Oak. Redgum is harder than that. I'm sure maple varies and I don't have a lot of experience with it. Redgum cuts very cleanly - very little cleanup required after CNC.
Graeme Chandler (Australia)
ShopBot Desktop
Aspire 8

User avatar
scottp55
Vectric Wizard
Posts: 3609
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Redgum floating shelf with live edge

Post by scottp55 »

Savannahdan,
Remember this is "River Red Gum" from Australia...almost twice as dense, and more than twice the hardness of what Americans call "Red Gum"
https://www.wood-database.com/river-red-gum/
https://www.wood-database.com/sweetgum/
Whole different Genus.
It doesn't cut quite like anything except maybe Bloodwood/Cocobolo in 3Ds Thinking maybe Macassar Ebony/and Indian Rosewood would come close, but haven't done a 3D on them yet.
Only done 4 cuts on River Red Gum, and VERY close to what Coogara said as far as finishing after a cut.
You can almost see the sheen in this finishing toolpath with my 3" long .25mmTBN. Only sanding was on the mill marks on the steep edges which lower stepover would have helped. BUT I had to sand the difference in my "Flip" anyways, as I wanted the "Scrap" for other things, so didn't use index pins for alignment. :oops:
10.30.18 RIVER RED GUM DADS HEART TESTING OFFSET FINISH2.jpg
SHOULD be too, as he brought mine to me in his suitcase(same board? Same Tree?:) when he and his wife visited me for a few days a couple years ago :)
Closest to a domestic American hardwood in 3D cutting characteristics would probably be Claro Walnut, or Black Walnut with dense growth rings (as in highly figured or around knots).
The Heart on Firewood is almost finished, as Mom didn't like the soft sheen of Beeswax, so multi-coats of oil underway.
2.4.19 MOMS HEART RIVER RED GUM ON FIREWOOD.jpg
The pic with the MUNGO tabs(which were machined off after the 7 names were engraved) was just brushed off with a Stiff brush that still had a hair of Linseed/Beeswax "Butter", from another project I was finishing while the Heart was cutting.
10.31.18 DADS HEART BOTTOM FINISH2.jpg
The RED comes right back at you when you finish it.
10.30.18 RIVER RED GUM LINWAX BRUSH LIGHT DADS HEART TOP DONE 1.jpg
2.4.19 MOMS HANGING HEART RIVER RED GUM 1.jpg
I found my pieces were slightly prone to internal stress cracks like Macassar Ebony, but that may just be my limited pieces.
Coogara mentioned to me that the Really Primo figured River Red Gum, was usually sent to North America for custom gun stocks.

NICE end result G. !!! :D
scott

OH..IF anybody has carved any of the "Related Species" in wood database Eucalyptus genus...and it's available in NA generally...could you mention how it cuts? Just curious!
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

ZipperHead55
Posts: 49
Joined: Fri Apr 04, 2014 2:21 am
Model of CNC Machine: Axiom AR4Pro+ and AR8Pro+
Location: Edmonton, Alberta, Canada

Re: Redgum floating shelf with live edge

Post by ZipperHead55 »

Love it! It's quite the spectacular (and expensive, I'm guessing) mug holder!! Perfect for the man cave, or the cabin. It gives me a perfect idea for my friends RV though (we go camping together a lot, and alcohol and caffeine are consumed in great quanitities, so a mug full of 50/50 liquor coffee mix would be perfect!).

Allan

User avatar
scottp55
Vectric Wizard
Posts: 3609
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Redgum floating shelf with live edge

Post by scottp55 »

While looking at other Eucalyptus species other than River Red Gum....I stumbled across a US distributor for it that imports logs and saws it here;
https://www.advantagelumber.com/eucalyptus.htm

Not Ridiculously priced, and some good pics to drool over :)
Anybody lucky enough to live near the resaw location Florida(CA?) would be able to pick their pieces :D
Just mentioning, as the River Red Gum seems to be so much denser and harder than other Eucalyptus species I glanced at.
Also I noted that whatever pest makes the holes in the bark, there's a good chance for internal cracks near the hole for a couple inches in and around(uneven drying?).
Coogara said my 2 pieces came from the same slab as this project, so not a whole lot of varied experience:)
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

Savannahdan
Vectric Wizard
Posts: 396
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Redgum floating shelf with live edge

Post by Savannahdan »

Scott, I figured it was the Redgum from down-under. I use to troll one of the forums where folks talked about cutting their own lumber. My backyard has stacks from my efforts to do just that. I always loved watching the videos of folks down-under cutting redgum with a swing-blade mill (Lucas), which is what I had. It would be nice to have some to experience cutting it.

User avatar
WNC_Ed
Vectric Craftsman
Posts: 266
Joined: Fri Dec 07, 2018 5:56 pm
Model of CNC Machine: Shark HD4 AXYZ 4010
Location: Western North Carolina - Heart of the Smokies

Re: Redgum floating shelf with live edge

Post by WNC_Ed »

Scott, great link - I see their NC yard isn't too far away - I might have to wander down there and check it out.
Maker of sawdust

User avatar
scottp55
Vectric Wizard
Posts: 3609
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Redgum floating shelf with live edge

Post by scottp55 »

Savannahdan,
Hadn't heard of that rig before, so Googled it and saw them chunking up a LOG of River Red Gum and cruising right along cutting 8X8"s (?) !!
I saw the slab cutting attachment,but not in action.
Did yours use the Big saw blades? Curious about what species you cut up for your "Stash"?
Any of your projects cut from that wood on this Forum?

WNC_Ed,
THAT will be an interesting trip:)
Mind going slightly out of your way and picking me up? :D :D
Thick boards/thin boards/Exotics :)
8/4 Bloodwood!!! (Pick me up a slab...check is in the mail :D :D :D ).
Got a chunk of African Blackwood a Scottish Shortpipe maker
https://www.pinchbeckpipes.com/sound
gifted me for a morning in my shop learning about his new Desktop, and been saving....$100bf!!!
I'll save it till I'm Positive I know what it wants to be!! :)
Chris knew more about working Exotics than I probably EVER will!!
Wonder what the NC shop cuts and has in stock...wish we had a place like that close to me!
I'd absolutely be checking out their Shorts and waste bin!!
Have a good trip:)
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

Post Reply