Solider and his horse

This is the place to post images of work produced using Aspire
Post Reply
mark-s
Vectric Apprentice
Posts: 202
Joined: Sat Feb 03, 2018 2:03 am
Model of CNC Machine: diy 4 X 4 CNC Router
Location: So. Cal.

Solider and his horse

Post by mark-s »

Maple, matte clear coat.
76.2 mm 0.5 mm ball nose.
mark-s
CNC SOLIDER AND HORSE 5.jpg

User avatar
Creation in Wood
Vectric Wizard
Posts: 489
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick CNC 4x8
Location: Monument, Colorado USA

Re: Solider and his horse

Post by Creation in Wood »

Nice job Mark
Thank You
Doug

User avatar
scottp55
Vectric Wizard
Posts: 3589
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Solider and his horse

Post by scottp55 »

Nice Mark!
Delicate Hat! :)
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

User avatar
TReischl
Vectric Wizard
Posts: 3360
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset
Location: Leland NC

Re: Solider and his horse

Post by TReischl »

Mark, just stop wouldya? You are having too much fun!

When I was digging Grape Dude out of the archives I stumbled across that model too. And a bunch of others that are in the folder marked "Round Tuit Files".

Nice job, nice finish!
"If you see a good fight, get in it." Dr. Vernon Jones

Post Reply