Christmas Nativity Scene
-
- Posts: 2
- Joined: Tue Jan 09, 2018 4:04 am
- Model of CNC Machine: Shark HD4 ext
Christmas Nativity Scene
I used two components from design and make and carved in mahogany on cnc shark hd4 extended bed. I finished it with shellac, glaze, and poly. My wife's Christmas present.
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Christmas Nativity Scene
Fantastic job
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Christmas Nativity Scene
Very nice. I am sure it will be cherished. Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Christmas Nativity Scene
Very nice and the glaze brings out a lot of detail. What size is the piece?
Mark
Mark
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Christmas Nativity Scene
Looks great! Did you use a 0.125" BN for the Finish Pass? Almost looks like more detail could be rendered with a 0.0625" BN
But, it's hard to tell from the photo. It is wonderful as it is!
But, it's hard to tell from the photo. It is wonderful as it is!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 2
- Joined: Tue Jan 09, 2018 4:04 am
- Model of CNC Machine: Shark HD4 ext
Re: Christmas Nativity Scene
Thanks for the kind words, it is 18" diameter and yes I did use an 1/8" ball nose. I previewed 1/16" and didn't see much difference and the run time was very long as it was so I thought the 1/8" was a good compromise.
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
-
- Posts: 3
- Joined: Thu Nov 07, 2013 4:16 pm
- Model of CNC Machine: Pilot Pro 50x50
- Location: scappoose oregon
Re: Christmas Nativity Scene
Your piece does justice to the beauty of the birth of the Savior of the world, thank you, Jim
Re: Christmas Nativity Scene
Very nice work and great set up for the picture, really brings out the beauty of it.