We’re coming to DENVER! Save the date & book your place!
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
We’re coming to DENVER! Save the date & book your place!
Firstly, we would like to thank all our 2018 attendees, partners and guest speakers for making this years’ User Group Meeting the best yet!
Here’s a snapshot of all the action from this year’s User Group Meeting in Chicago. https://youtu.be/hJO2hSx35do
With that in mind we couldn’t wait to share with you the dates and location of our next User Group Meeting. We’re delighted to announce that the 2019 User Group Meeting will be held at the Embassy Suites Hotel at the Downtown Convention Centre in Denver on Friday 11th & Saturday 12th October 2019.
We'll be packing both days full covering; ‘What's New’ in version 10 along with projects and ideas to increase your knowledge and efficiency using the software. As well as the technical benefits, the User Group Meeting gives like-minded CNC enthusiasts the opportunity to get together, showcase their projects and share knowledge.
As with previous meetings, the meeting will take place over two days and will have a strong focus on our Aspire and VCarve software with some of the sessions also being relevant to Cut2D.
The fee per person to attend is $249.00, which includes refreshments and lunch throughout both days as well as a welcome pack, USB containing all the presentations and a free gift. To help minimise costs, we have made arrangements with the Embassy Suites Convention Centre in Denver to offer a discounted accommodation rate of $189 per night. Room availability is limited, to book your room click the link below:
https://embassysuites.hilton.com/en/es/ ... .mc_id=POG
**BOOK YOUR PLACE**
Login to your V&CO account to book your place: https://portal.vectric.com/usergroup/2019
Take a look at the agenda and the comments from our attendees for our 2018 User Group Meeting in Chicago here: http://forum.vectric.com/viewtopic.php? ... ng#p220655
We are looking forward to seeing you all again.
The Vectric Team.
Here’s a snapshot of all the action from this year’s User Group Meeting in Chicago. https://youtu.be/hJO2hSx35do
With that in mind we couldn’t wait to share with you the dates and location of our next User Group Meeting. We’re delighted to announce that the 2019 User Group Meeting will be held at the Embassy Suites Hotel at the Downtown Convention Centre in Denver on Friday 11th & Saturday 12th October 2019.
We'll be packing both days full covering; ‘What's New’ in version 10 along with projects and ideas to increase your knowledge and efficiency using the software. As well as the technical benefits, the User Group Meeting gives like-minded CNC enthusiasts the opportunity to get together, showcase their projects and share knowledge.
As with previous meetings, the meeting will take place over two days and will have a strong focus on our Aspire and VCarve software with some of the sessions also being relevant to Cut2D.
The fee per person to attend is $249.00, which includes refreshments and lunch throughout both days as well as a welcome pack, USB containing all the presentations and a free gift. To help minimise costs, we have made arrangements with the Embassy Suites Convention Centre in Denver to offer a discounted accommodation rate of $189 per night. Room availability is limited, to book your room click the link below:
https://embassysuites.hilton.com/en/es/ ... .mc_id=POG
**BOOK YOUR PLACE**
Login to your V&CO account to book your place: https://portal.vectric.com/usergroup/2019
Take a look at the agenda and the comments from our attendees for our 2018 User Group Meeting in Chicago here: http://forum.vectric.com/viewtopic.php? ... ng#p220655
We are looking forward to seeing you all again.
The Vectric Team.
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
Nice! Less than 2 hours from me... I'm already signed up.
Chris
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
I'm looking forward to seeing everybody in Denver! Woo Hoo!!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- carbidetooth
- Vectric Apprentice
- Posts: 59
- Joined: Mon Apr 09, 2018 8:01 am
- Model of CNC Machine: ShopSabre Pro 408
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
Would this make sense for a relative newbie?
I've been using Vcarve and CNC casually for less than a year. Will be upgrading to Aspire soon. There's plenty I don't know, but not really wanting to spend time and money to befuddle myself too much.
I've been using Vcarve and CNC casually for less than a year. Will be upgrading to Aspire soon. There's plenty I don't know, but not really wanting to spend time and money to befuddle myself too much.
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
Absolutely! In fact, relative newbies probably have the most to gain from these events.Would this make sense for a relative newbie?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- carbidetooth
- Vectric Apprentice
- Posts: 59
- Joined: Mon Apr 09, 2018 8:01 am
- Model of CNC Machine: ShopSabre Pro 408
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
OK Randall, I'm in. Don't own a laptop...will I need one?Rcnewcomb wrote:Absolutely! In fact, relative newbies probably have the most to gain from these events.Would this make sense for a relative newbie?
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
A laptop is not critical for success. Everything will come on a USB thumb drive which you can use when you get back home.Don't own a laptop...will I need one?
At breaks and meals be brave and strike up conversations with other attendees. That way you will learn as much during the breaks as you do during the sessions.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- jimwill2
- Vectric Wizard
- Posts: 612
- Joined: Tue Aug 31, 2010 1:48 am
- Model of CNC Machine: CaMaster Stinger w/recoil, FTC
- Location: Parkville, Missouri
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
I just signed up! Twenty minutes from home.
Jim Williams
-
- Vectric Wizard
- Posts: 486
- Joined: Mon Nov 06, 2017 1:57 pm
- Model of CNC Machine: Shapeoko 3D XXL
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
I was reading this post about the Denver meeting next year.
I read a comment about not having a computer.
The reply was you did not need one that everything information would be on a thumb drive to take home.
Well my question is this was there a thumb drive given this year in chicago, I was not able to get a spot there.
If there is one would it be possible to buy one , I have a Vcarve Pro program.
Jeff
I read a comment about not having a computer.
The reply was you did not need one that everything information would be on a thumb drive to take home.
Well my question is this was there a thumb drive given this year in chicago, I was not able to get a spot there.
If there is one would it be possible to buy one , I have a Vcarve Pro program.
Jeff
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
Hello Jeff,
There are no plans to release the USB's from the Chicago UGM in full, however,
much of the information will most likely be re-presented as projects over the next few months.
The Terrain Maps project, available within the Tips and Tricks section of your V&Co. Portal account page is one example.
I hope that this helps.
Cheers,
Mark.
There are no plans to release the USB's from the Chicago UGM in full, however,
much of the information will most likely be re-presented as projects over the next few months.
The Terrain Maps project, available within the Tips and Tricks section of your V&Co. Portal account page is one example.
I hope that this helps.
Cheers,
Mark.
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
I've signed up.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
I'm signed up, and the hotel booked.
We're going to add it to our Fall travel itinerary where we Leave Southern California then stop at friends in Aurora CO, Galena MO, and Harrison AK.
I have a 11 ft. tall truck camper (camper on a Ford F250 truck). The hotel says that they can't park it, so I'll see if we can leave it at our friends in Aurora CO and Uber in on Thursday.
![Smile :)](./images/smilies/icon_smile.gif)
I have a 11 ft. tall truck camper (camper on a Ford F250 truck). The hotel says that they can't park it, so I'll see if we can leave it at our friends in Aurora CO and Uber in on Thursday.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
Signed up. Already have our room reservations.
John
Maker of Chips
Maker of Chips
-
- Vectric Craftsman
- Posts: 170
- Joined: Sun Jul 28, 2013 9:09 pm
- Model of CNC Machine: Shopbot Desktop
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
I'm planning on attending the Vectric User Group 2019 meeting. Denver is closer to me than Chicago, even though Denver is 3,000 miles from Anchorage. One of these years you'll have have to plan on holding a meeting in Seattle then I'm only a 3.5 hour flight for me to attend.
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: WE’RE COMING TO DENVER! SAVE THE DATE & BOOK YOUR PLACE!
Ok I am in, i have booked both the seminar and a room for 3 nights.