Table Leg using Aspire 9.5

Topics related to wrapped rotary machining in Aspire or VCarve Pro
Post Reply
User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Table Leg using Aspire 9.5

Post by Rcnewcomb »

Table leg: 22" long, 3.25" diameter, Douglas Fir, 0.5" end mill for roughing, 0.25" ballnose for finish. About 2.5 hours machine time at 180 IPM XY & Z.
LegRoughIMG_3245.jpg
LegNearlyDoneIMG_3252.jpg
LegDoneIMG_3260.JPG
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

4DThinker
Vectric Wizard
Posts: 1701
Joined: Sun Sep 23, 2012 12:14 pm
Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"

Re: Table Leg using Aspire 9.5

Post by 4DThinker »

Best use for a 4x4 ever! Well done! :)

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Table Leg using Aspire 9.5

Post by highpockets »

Wow! Nice work.... I'm very envious of your 4th axis :D
John
Maker of Chips

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Table Leg using Aspire 9.5

Post by Rcnewcomb »

5 seconds of video showing the cutting: Table Leg with Aspire 9.5
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
IslaWW
Vectric Wizard
Posts: 1402
Joined: Wed Nov 21, 2007 11:42 pm
Model of CNC Machine: CNC Controller Upgrades
Location: Bergland, MI, USA

Re: Table Leg using Aspire 9.5

Post by IslaWW »

Randall...
I'm going to have to buy you a few minutes so that you can post a video that's 20 or 30 seconds. :P :P
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: Table Leg using Aspire 9.5

Post by RebeccaJ »

Very Nice Randall!
Thanks for sharing!
Beki
Senior Application Engineer - Vectric Ltd.

Post Reply