Table Leg using Aspire 9.5
- Rcnewcomb
- Vectric Archimage
- Posts: 5935
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Table Leg using Aspire 9.5
Table leg: 22" long, 3.25" diameter, Douglas Fir, 0.5" end mill for roughing, 0.25" ballnose for finish. About 2.5 hours machine time at 180 IPM XY & Z.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Wizard
- Posts: 1717
- Joined: Sun Sep 23, 2012 12:14 pm
- Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"
Re: Table Leg using Aspire 9.5
Best use for a 4x4 ever! Well done!
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Table Leg using Aspire 9.5
Wow! Nice work.... I'm very envious of your 4th axis
John
Maker of Chips
Maker of Chips
- Rcnewcomb
- Vectric Archimage
- Posts: 5935
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Table Leg using Aspire 9.5
5 seconds of video showing the cutting: Table Leg with Aspire 9.5
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- IslaWW
- Vectric Wizard
- Posts: 1407
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Table Leg using Aspire 9.5
Randall...
I'm going to have to buy you a few minutes so that you can post a video that's 20 or 30 seconds.
I'm going to have to buy you a few minutes so that you can post a video that's 20 or 30 seconds.
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Table Leg using Aspire 9.5
Very Nice Randall!
Thanks for sharing!
Thanks for sharing!
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.