The New Map Thread - Show us where you are in the world
-
- Posts: 9
- Joined: Tue Nov 17, 2015 9:23 pm
- Model of CNC Machine: Shark 3.0
- Location: Charlotte, NC 28226
Re: The New Map Thread - Show us where you are in the world
Thanks for including me on the map:
Copper John
Charlotte, NC 28226
Copper John
Charlotte, NC 28226
Re: The New Map Thread - Show us where you are in the world
Bryan Slocomb - Goldsby, Oklahoma
-
- Posts: 14
- Joined: Sat Feb 25, 2017 6:57 pm
- Model of CNC Machine: Axiom 8 Pro
- Location: Ravenswood, WV
Re: The New Map Thread - Show us where you are in the world
Dale Vanderlaan - Ravenswood, West Virginia
Thanks
Thanks
-
- Posts: 11
- Joined: Mon May 02, 2016 3:14 pm
- Model of CNC Machine: X-Carve 1000mm
Re: The New Map Thread - Show us where you are in the world
jonnylbluejeans Brandon, MS 39047
-
- Posts: 7
- Joined: Fri Apr 18, 2014 10:53 pm
- Model of CNC Machine: DIY, Martin Broekx Design CNCRouter 6050
- Location: Concord, New Hampshire
Re: The New Map Thread - Show us where you are in the world
Al P
Nitro2134
Concord, NH 03303
Nitro2134
Concord, NH 03303
-
- Posts: 20
- Joined: Mon Dec 27, 2010 2:22 pm
- Model of CNC Machine: Legacy Arty58 / Shark Pro
- Location: Land O Lakes, Fl
Re: The New Map Thread - Show us where you are in the world
Daryl Turk
Land O Lakes, Fl. 34638
Land O Lakes, Fl. 34638
-
- Posts: 1
- Joined: Sun May 27, 2018 8:04 am
- Model of CNC Machine: Tormach PCNC 440 CNC Mill
- Contact:
Re: The New Map Thread - Show us where you are in the world
David from Ohio
Nice to meet all you!
Nice to meet all you!
Re: The New Map Thread - Show us where you are in the world
Gales Ferry, CT 06335
- bill565
- Vectric Craftsman
- Posts: 116
- Joined: Sat May 10, 2008 4:58 pm
- Model of CNC Machine: One of those "Practical"4x4s
- Location: Jafrey New Hampshire
- Contact:
Re: The New Map Thread - Show us where you are in the world
Bill565
Jaffrey, NH
Jaffrey, NH
Save the Whales, Collect the Whole Set
http://www.bcnc-fab.com
http://www.bcnc-fab.com
Re: The New Map Thread - Show us where you are in the world
Ralph L. Travis
Jefferson Hills, PA 15025-4003
Jefferson Hills, PA 15025-4003
-
- Posts: 8
- Joined: Tue Jun 12, 2018 12:46 pm
- Model of CNC Machine: Axiom AR8Pro
Re: The New Map Thread - Show us where you are in the world
Jake Kohl
Green Room Graphics
Greenville, SC 29615
Green Room Graphics
Greenville, SC 29615
-
- Posts: 25
- Joined: Tue Jan 09, 2018 8:33 pm
- Model of CNC Machine: Shark HD4
- Location: Noonan, ND
- Contact:
Re: The New Map Thread - Show us where you are in the world
Rob Zukowski
The Frontiersman Custom Wood Creations
Noonan, ND 58765
The Frontiersman Custom Wood Creations
Noonan, ND 58765
-
- Posts: 3
- Joined: Wed Jun 13, 2018 11:02 pm
- Model of CNC Machine: MaxNC / Grbl1.1 / Arduino / grbl Panel
- Location: Utah
- Contact:
Re: The New Map Thread - Show us where you are in the world
Cedar City, Utah
- MarkL
- Posts: 32
- Joined: Sun Nov 30, 2014 9:35 am
- Model of CNC Machine: Avid 4848 Pro CNC
- Location: Southern Oregon, USA
- Contact:
Re: The New Map Thread - Show us where you are in the world
Mark Lindsay
White City Oregon 97503
White City Oregon 97503
Double check, triple check, measure, measure, cut...
MarkLindsayCNC
MarkLindsayCNC
-
- Posts: 10
- Joined: Mon Jun 16, 2014 2:50 am
- Model of CNC Machine: Camaster Stinger II
- Location: Siloam Springs, AR
Re: The New Map Thread - Show us where you are in the world
ksmith1961
Kevin's Custom Woodwork
Siloam Springs, AR 72761
Kevin's Custom Woodwork
Siloam Springs, AR 72761