Wood Grain Edges

This section is for useful tips and tricks for Aspire
Post Reply
DEdwards
Vectric Apprentice
Posts: 7
Joined: Wed May 10, 2017 9:34 pm
Model of CNC Machine: I dont know

Wood Grain Edges

Post by DEdwards »

I have figured out how to do the woodgrain effects into aspire, my next question (which i apologize for)

My artwork that is surrounded by the woodgrain texture now how choppy edges, I have tried the boundary offset and I really can't have that halo effect in this project. Im sorry if this is vague, ill try and upload this so you guys can take a look.

Thank you for your help

Devin BSG

User avatar
mtylerfl
Vectric Wizard
Posts: 4698
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Wood Grain Edges

Post by mtylerfl »

Hi Devn,

Yes, please post a photo and/or your file. (If your file is too large to make available here, use DropBox and post a link.) At the very least, post a photo or two!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
sawmiller
Vectric Wizard
Posts: 500
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: Wood Grain Edges

Post by sawmiller »

woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

User avatar
mezalick
Vectric Wizard
Posts: 2582
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: Wood Grain Edges

Post by mezalick »

Sawmiller,
Thanks for posting the link.
I have used it many time on so many projects and send it to others with similar problems.
Jamie is a real forward thinker....someone to be valued.
And to think...that post from Jamie was from 2012.......old info can still be some of the best..
Michael
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

User avatar
sawmiller
Vectric Wizard
Posts: 500
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: Wood Grain Edges

Post by sawmiller »

i like reading his blogs, the differe3nt ways he solves problems.
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

Post Reply