I used to power it with 230V 3 phase, but I am running out of a residential garage now, so the static controller will not work. I assume I will need another controller.
I am not sure about 230v single and 3 phase, although from what I have read the 230v available in a residence will be single phase.
Will this unit work? http://shop.actechdrives.com/AC-Tech-Le ... n02txb.htm
What Do I Need For My 5hp 230V Spindle?
-
- Vectric Apprentice
- Posts: 86
- Joined: Wed Feb 15, 2017 2:03 pm
- Model of CNC Machine: 2 SCM Routech Record 120s(1999, 2001)
Re: What Do I Need For My 5hp 230V Spindle?
YOu need a 5hp Variable Frequency drive. I suggest leaving this job to a pro. Hiring an electrician will pay for itself by making sure you are set up correctly.
- IslaWW
- Vectric Wizard
- Posts: 1403
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: What Do I Need For My 5hp 230V Spindle?
Dan...
I would qualify this a bit more. You either need a 5 HP single phase rated VFD or a 10 HP 3 phase unit.
Plus 1 to the hire a qualified tradesman
I would qualify this a bit more. You either need a 5 HP single phase rated VFD or a 10 HP 3 phase unit.
Plus 1 to the hire a qualified tradesman
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
-
- Posts: 14
- Joined: Wed May 13, 2009 4:06 pm
Re: What Do I Need For My 5hp 230V Spindle?
5 HP single phase rated VFD output is equal to a 10 HP 3 phase unit?
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: What Do I Need For My 5hp 230V Spindle?
When you run a bigger 3 phase VFD in single phase, you need to derate it 50%
Gerry - http://www.thecncwoodworker.com
Re: What Do I Need For My 5hp 230V Spindle?
Before you go to a lot of expense in hiring a electrician or other conversion, you may consider a 3-phase to single phase converter. Although I purchased one going the other way (single to three-phase), they are fairly cheap, usually under $200. Do a Google search and you should find something. The 5-hp spindle don't require a lot of ampage, so consider that before you buy. Gary
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: What Do I Need For My 5hp 230V Spindle?
This would probably work for you.
http://www.ebay.com/itm/VARIABLE-FREQUE ... 0829774379
http://www.ebay.com/itm/VARIABLE-FREQUE ... 0829774379
Gerry - http://www.thecncwoodworker.com
-
- Vectric Apprentice
- Posts: 91
- Joined: Wed Dec 28, 2011 2:47 am
- Model of CNC Machine: Home Built
- Location: Lloydminster, Alberta, Canada
Re: What Do I Need For My 5hp 230V Spindle?
You need to send it to me and I'll send you my Colt