I'm very grateful and humbled by all the kind comments on this thread. It would be hard to put into words how much I've enjoyed the last 10+ years of direct and indirect involvement with Vectric. One of the main reasons is the unusually large number of nice people who seem to be Vectric customers. There are too many to name-check everyone but its been a pleasure both on the forum and in person at the User Groups, camps, trade shows etc. The enthusiasm for the software and CNC has always been infectious and inspiring. Although I might not be around as much on the forum I'm hoping that if I can sort out a place to put it a small CNC then I'll be making the ideas currently swilling around in my brain into reality and post some of the results here.
With regard to moving-on I'll miss a lot about working at Vectric but am ready to do something new, not sure what that is yet and I look forward to some time-out and doing a lot of reading, running, research and thinking before I decide - I do know that if my future involves other business ventures then I can only hope to get close to how Vectric operates both in terms of quality of product but also how it does business too. I would like to extend a personal thanks to Brian for the opportunity, challenge and fun of the last 5 years and look forward to continuing our friendship outside of work. Vectric have a great team in place and I'm going to enjoy watching how the company evolves over the next 5 years and beyond, I've no doubt it will be with continued success.
Thanks again for all the good wishes!
Cheers,
James
James is moving on!
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: James is moving on!
James I've been away from the forum but have to say what a pleasure isn't' been knowing you. I think a lot of us were listing to your tutorials and thought of you as a friend even when you didn't know us.
It kind of leaves a hole that I know will be filled but I think there is only one James.
Good luck to you my friend.
Mark
It kind of leaves a hole that I know will be filled but I think there is only one James.
Good luck to you my friend.
Mark
-
- Vectric Craftsman
- Posts: 277
- Joined: Sat Mar 29, 2008 8:00 pm
- Location: Millington, MI
- Contact:
Re: James is moving on!
James; I wish you the very best now and in your future, this includes your family. I consider to be lucky, when you came to my small shop in Michigan for an Aspire Group. Also thankful for the custom 3D profiles you have done for me.
You will be missed by many in the Aspire world, but then something tells me, we have not heard the last from James Booth.
God Bless and Best Regards
Buck
You will be missed by many in the Aspire world, but then something tells me, we have not heard the last from James Booth.
God Bless and Best Regards
Buck
-
- Vectric Apprentice
- Posts: 51
- Joined: Sat Feb 18, 2012 7:57 pm
- Model of CNC Machine: Shopbot Buddy Alpha48
- Location: Timmins, North Eastern Ontario, Canada
- Contact:
Re: James is moving on!
All the best in the future, James. I am sure whatever you decide to do, it will be done well and you'll be a success.
Thanks for all your help in the past several years, your friendliness and willingness to entertain "dumb" questions by people such as myself! It was always a pleasure to speak to you in person.
Best of luck in your, and your family's future!
Andrew Coholic
Thanks for all your help in the past several years, your friendliness and willingness to entertain "dumb" questions by people such as myself! It was always a pleasure to speak to you in person.
Best of luck in your, and your family's future!
Andrew Coholic
-
- Vectric Apprentice
- Posts: 79
- Joined: Sat May 13, 2006 1:10 pm
- Model of CNC Machine: 2010 Shop Bot PRS Alpha 18"Z
- Location: Jasper, TX
- Contact:
Re: James is moving on!
I'm glad to have met you. Wish you the best at your next adventure.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: James is moving on!
I have been away for a while and this was quite a shock to read.
However, I am certain this is a farewell not a goodbye.
I am going to miss your distinctive Pommie voice and your willingness to help us when we got into a muddle.
Take care and enjoy whatever you are going to do in the future.
Cheers from OZ.
However, I am certain this is a farewell not a goodbye.
I am going to miss your distinctive Pommie voice and your willingness to help us when we got into a muddle.
Take care and enjoy whatever you are going to do in the future.
Cheers from OZ.
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
-
- Vectric Wizard
- Posts: 442
- Joined: Fri Jun 06, 2008 4:41 pm
Re: James is moving on!
Best of luck and it was a real pleasure meeting you and picking your brain. I still never figured out why if I do a litho in Photo v carve that it takes so much longer to render when I set zero to the material to the bottom than when I set it the top. Will miss you good luck again and stay on the forum