Football plaque

Gallery for samples created from Vector Art 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
tonydude919
Vectric Wizard
Posts: 762
Joined: Sat Jan 09, 2010 7:28 am
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
Location: Buffalo,NY

Football plaque

Post by tonydude919 »

Here is a football plaque I made out of hard maple. Size is 8" x 10-1/2" Took about 2 hrs to carve. Using a .25 endmill for rough and a .125 ball nose bit for finishing pass. Used a 90 v bit for lettering.

Tony
Attachments
2.jpg
What will matter is not what you bought but what you built; not what you got, but what you gave

User avatar
Todd Bailey
Vectric Staff
Posts: 233
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: Football plaque

Post by Todd Bailey »

Hello Tony!

It looks great and in just 2 hrs!

Thanks for sharing!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

AlbertaClipper
Vectric Apprentice
Posts: 90
Joined: Wed Dec 28, 2011 2:47 am
Model of CNC Machine: Home Built
Location: Lloydminster, Alberta, Canada

Re: Football plaque

Post by AlbertaClipper »

Nice work but you spelled New England Patriots wrong :wink:

Post Reply