Tank
Tank
I did this gun barrel in a Z-Brush exercise, so I decided to build it using Aspire. I think I got carried away, but it was a good way to get rid of all the small scrap wood I had laying around. It measures 16" x 9" x 10".
- ChiloquinRuss
- Vectric Craftsman
- Posts: 174
- Joined: Mon Jan 28, 2008 3:58 am
- Model of CNC Machine: 2008 48x96 ShopBot spindle and Aspire
- Location: Chiloquin, Oregon
Re: Tank
Thanks for the complements. There were too many and too large of files, so I put it in Dropbox. I was working with both millimeters and inches, so you may have to make sure of the measurements. I just cut the body on the radial saw that looked good, so there's no file. The rotary attachment was used on a good part of the model. I have a "Track" file, courtesy of Dale(dhellew2), however, after a day of machining and breaking all my small mills, I changed it to threaded wheels instead. It was a fun project and my grandson has already made claim on it. GaryMagic job Gary! Any chance of posting tye CRV's?
https://www.dropbox.com/s/m3bs1yrehlfyxsf/Tank.zip?dl=0