Using the Half Toner gadget with Aspire V8.505 I'm getting the following error. Anyone else used the Half Toner gadget with V8.505?
Failed to save tool database to file
C:\ProgramData\Vectric\Aspire\V8.5\ToolDatabase\tools.tool_db
Half Toner with V8.505
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Half Toner with V8.505
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Half Toner with V8.505
Just tried mine and it appears to be ok
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Re: Half Toner with V8.505
Randall - try checking your read-write priveliges to that folder and see if its set to read-only.
Thanks,
James
Thanks,
James
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Half Toner with V8.505
The folder permissions were fine but the tools.tool_db file was set to readonly. I changed that and now the issue is resolved. Thanks for putting me on the right track.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop