Decorative scissors

This is the place to post images of work produced using Aspire
User avatar
rscrawford
Vectric Wizard
Posts: 979
Joined: Mon Jan 17, 2011 6:49 pm
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
Location: Wetaskiwin, Alberta
Contact:

Decorative scissors

Post by rscrawford »

A little different project from my normal work. I was asked to make a pair of decorative scissors to be used for photographs during ribbon cutting ceremonies by a local hospital foundation.

Walnut and maple, with a maple hinge pin (tried to make it look like a hammered rivet).
Attachments
Scissors2.JPG
Scissors3.JPG
Scissors1.JPG
Scissors4.JPG
Scissors5.JPG
Russell Crawford
http://www.cherryleaf-rustle.com

michiganbill
Posts: 17
Joined: Wed Feb 29, 2012 4:04 pm
Model of CNC Machine: FLA300

Re: Decorative scissors

Post by michiganbill »

Very Nice :D

User avatar
TReischl
Vectric Wizard
Posts: 3565
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset
Location: Leland NC

Re: Decorative scissors

Post by TReischl »

I like them!
"If you see a good fight, get in it." Dr. Vernon Jones

James M
Posts: 33
Joined: Sun Apr 26, 2015 9:06 pm
Model of CNC Machine: TBA
Location: Calgary, Alberta

Re: Decorative scissors

Post by James M »

Nice Job Russell! Hope the managers aren't off sick! LOL

User avatar
mtylerfl
Vectric Wizard
Posts: 4682
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Decorative scissors

Post by mtylerfl »

I really like the Scissors! Great work, Russell!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

joeporter
Vectric Wizard
Posts: 503
Joined: Tue Jul 21, 2009 8:22 pm
Model of CNC Machine: ShopBot Buddy Standard
Location: Marietta, GA.

Re: Decorative scissors

Post by joeporter »

Beautiful, beautiful, beautiful woodworking!!....joe

sfsubcutter
Posts: 24
Joined: Wed Sep 22, 2010 4:32 pm

Re: Decorative scissors

Post by sfsubcutter »

Wonderful piece! Nicely Done.

scottart
Vectric Craftsman
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
Location: Willow, Alaska
Contact:

Re: Decorative scissors

Post by scottart »

Well done. Nice project

User avatar
rscrawford
Vectric Wizard
Posts: 979
Joined: Mon Jan 17, 2011 6:49 pm
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
Location: Wetaskiwin, Alberta
Contact:

Re: Decorative scissors

Post by rscrawford »

Someone requested the files for these scissors, so I'll post them here. They are in V-carve Pro format.
Attachments
Scissors Blades.crv
(1.22 MiB) Downloaded 344 times
Scissors Handles.crv
(1.21 MiB) Downloaded 317 times
Scissors pin.crv
(194.5 KiB) Downloaded 300 times
Russell Crawford
http://www.cherryleaf-rustle.com

User avatar
Phil
Vectric Wizard
Posts: 2456
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Decorative scissors

Post by Phil »

Thank you. :D

Phil

User avatar
scottp55
Vectric Wizard
Posts: 3693
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Decorative scissors

Post by scottp55 »

Thanks Russell! :)
NICE job by the way, but you already had a lot of compliments I couldn't add to. :)
scott
scott

User avatar
jarm2
Vectric Craftsman
Posts: 186
Joined: Wed Jun 13, 2012 9:16 pm
Model of CNC Machine: C&CNC electronics
Location: Harpster, Idaho

Re: Decorative scissors

Post by jarm2 »

Thanks for the files, Russel. I will add these to my todo list. Looks like these would be fun to make and have on display at my market booths.
Joe
Vectric Aspire 10, AutoCAD lite, Corel Draw 2019, ViaCAD Pro 9, W 10

User avatar
rscrawford
Vectric Wizard
Posts: 979
Joined: Mon Jan 17, 2011 6:49 pm
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
Location: Wetaskiwin, Alberta
Contact:

Re: Decorative scissors

Post by rscrawford »

Here are dxf files for the blades and the handles (for someone who pm'd and can't open those other files with v-carve 7.5). The pin vectors are just two circles, so I didn't bother to include them. There is no info on bits or cut strategies with these vectors in dxf format, just the plain vectors.
Attachments
Scissors Blades.dxf
(719.28 KiB) Downloaded 230 times
Scissors Handles.dxf
(423.01 KiB) Downloaded 218 times
Russell Crawford
http://www.cherryleaf-rustle.com

mick40
Vectric Apprentice
Posts: 78
Joined: Wed Jun 17, 2009 1:25 am

Re: Decorative scissors

Post by mick40 »

Much appreciated!!! My wife is going to love this hung in her sewing room!

Mick

antennasDIY
Vectric Apprentice
Posts: 231
Joined: Wed Jul 10, 2013 3:43 am
Model of CNC Machine: Home made
Location: Canada

Re: Decorative scissors

Post by antennasDIY »

Very nice Russell. Thanks!!

Post Reply