8x13 Lithophane of an early 40's vintage 4x6 black and white photo
Material is candlestone
Cut with a 3/64" 3-flute spiral ball nose bit
Names laser engraved and filled with gel stain
Dale
Lithophane
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Lithophane
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
Re: Lithophane
Very nice detail on the faces. How long did it take you to carve it.
Tony
Tony
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Lithophane
Tony, it took about 17 hours..... Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Lithophane
Impressive work - And I thought my 6 hour cuts were long !
Very little wiggle room between time & quality with these, I know.
Very little wiggle room between time & quality with these, I know.
Doug