Downloading the 3D clipart?
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
Downloading the 3D clipart?
I upgraded yesterday, but I'm not quite sure how to find or download the included clip art.
Could someone point me in the right direction?
John
Could someone point me in the right direction?
John
- mfirlott
- Vectric Craftsman
- Posts: 299
- Joined: Thu Feb 07, 2013 12:49 am
- Model of CNC Machine: Stinger 1 (2014)
- Location: Cantley, Quebec, Canada
- Contact:
Re: Downloading the 3D clipart?
You will receive an additional email from Vectric for access to the Portal to do the downloads.
(Mitch)
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
Re: Downloading the 3D clipart?
can this take a few days from Vectric ?
-
- Vectric Craftsman
- Posts: 103
- Joined: Sun Feb 05, 2012 4:40 am
- Model of CNC Machine: Home built wooden machine - Mach3/Aspire
- Location: Fort Wayne, Indiana
Re: Downloading the 3D clipart?
Downloaded the software update and all of the associated library files for Aspire 8 without a hitch, simply let the files install into the default directory. Beware, some of the clip-art library's are fairly large and may take several minutes to download depending on the speed of your connection and how busy the Vectric server is.
Paul
Paul
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: Downloading the 3D clipart?
i bought the software update yesterday. it went without a hitch. But i have not heard from Vectric in reference to registering on the portal and the download of the clip art. Is it too soon to be worried?
Also another question. I compressed the setup file and added it to a thumb drive and transferred it to my lap top. It appears to be fine that way, but does compressing have its drawbacks.
Also another question. I compressed the setup file and added it to a thumb drive and transferred it to my lap top. It appears to be fine that way, but does compressing have its drawbacks.
-
- Vectric Craftsman
- Posts: 198
- Joined: Wed Aug 08, 2012 6:30 pm
- Model of CNC Machine: Shark Pro Plus
- Location: Liberty Twp (N. Cincinnati) OH
Re: Downloading the 3D clipart?
I downloaded the upgrade V8 on Wed and installed without a hitch but still waiting for the quoted e-mail.mfirlott wrote:You will receive an additional email from Vectric for access to the Portal to do the downloads.
How long should it take ?
Eric
The WoodEraser
Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio
The WoodEraser
Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Downloading the 3D clipart?
I believe you should have already received the email. Two things for you to check...WoodEraser wrote:I downloaded the upgrade V8 on Wed and installed without a hitch but still waiting for the quoted e-mail.mfirlott wrote:You will receive an additional email from Vectric for access to the Portal to do the downloads.
How long should it take ?
1) Is the email in your Spam Folder?
2) Are you certain you are using the exact same email address as when you initially registered your first Vectric product? (that's the email address they send the correspondence to)
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: Downloading the 3D clipart?
in less than 24 hours after downloading aspire 8 i received the link to the portal with my clipart, thanks.
- larrybadgett
- Vectric Wizard
- Posts: 457
- Joined: Fri Oct 20, 2006 1:21 pm
- Model of CNC Machine: ShopSabre
- Location: Corning, Iowa USA
- Contact:
Re: Downloading the 3D clipart?
Your one of the lucky one's! Both original email for V8 and the Portal never made it for me. The second on for V8 came through. Still waiting and hoping the third works for the Portal. Going all electronic sounded great in theory, not so good in real life!COWBOY1296 wrote:in less than 24 hours after downloading aspire 8 i received the link to the portal with my clipart, thanks.
-
- Vectric Craftsman
- Posts: 198
- Joined: Wed Aug 08, 2012 6:30 pm
- Model of CNC Machine: Shark Pro Plus
- Location: Liberty Twp (N. Cincinnati) OH
Re: Downloading the 3D clipart?
Never sent to spam and Yes still using same e-mail address as original.
???
???
Eric
The WoodEraser
Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio
The WoodEraser
Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio
-
- Posts: 28
- Joined: Wed Dec 28, 2011 11:52 pm
- Model of CNC Machine: CNC Shark HD520
- Location: Charlotte, NC
Re: Downloading the 3D clipart?
I had the same problem as a few of you fellows, upgraded my Aspire on 2/27/15 got the email information to download program but I never got the email for the portal for the 3D Clipart. I waited until 3/6/15 and I sent Vectric an email about the portal email I never got, and within a couple of hours I received 2 emails from Vectric to log into the Portal to download the clipart. They must be very busy right now with all the upgrade requests, and I really appreciated their quick response.
Drop them and email like I did.
Colin Helms
Drop them and email like I did.
Colin Helms