ASPIRE CAMP AT MCGREW 2015 !!
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
ASPIRE CAMP AT MCGREW 2015 !!
James Booth and I have confirmed the dates for this years Camp !!
April 30, May 1/2 2015 in Columbia SC at my shop !!
the registration is attached and more info will come as we put it together. Basically it is hard to top some of the fun we have had so the way I see it we do it AGAIN !!
Bring your Show and tell, the Exposure here on the forum and around the Web is Phenomenal !!
Feel free to visit and like the Facebook page as well !!
https://www.facebook.com/pages/Aspire-C ... 116?ref=hl
April 30, May 1/2 2015 in Columbia SC at my shop !!
the registration is attached and more info will come as we put it together. Basically it is hard to top some of the fun we have had so the way I see it we do it AGAIN !!
Bring your Show and tell, the Exposure here on the forum and around the Web is Phenomenal !!
Feel free to visit and like the Facebook page as well !!
https://www.facebook.com/pages/Aspire-C ... 116?ref=hl
- Attachments
-
- aspire registration 2015.pdf
- REGISTRATION !
- (197.56 KiB) Downloaded 705 times
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
Lots of Registrations today
please fax only to 803 933 9938 Not my cell number
I will be responding in the evenings, all who send in will get a verification email !!
please fax only to 803 933 9938 Not my cell number
I will be responding in the evenings, all who send in will get a verification email !!
Re: ASPIRE CAMP AT MCGREW 2015 !!
just registered. any suggestions for lodging? ted
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
Send in the registration form by email or fax, it is about cataloging shirt sizes, I will post some hotels tonight,, been a busy day ! gonna be a good Camp all the old guard and Gurus are signing up !
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: ASPIRE CAMP AT MCGREW 2015 !!
Not so sure that I fall into either of those categories James, but I registered yesterday and will be there for the third year in a row now. Anyone who hasn't been the first time should try to attend if you can. It has definitely improved my projects. James B., Becki (Becky?), and Sara from Vectric, Ltd are good folks to meet and talk with.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
Your work is Incredible and I look forward to it each Camp. I followed you for many years before meeting you and did my largest Calendars from your shared files !!
here is last years video for those who may attend for the first time , Had double the first day registrations from last year so with a pending new release this will be a big one !
here is last years video for those who may attend for the first time , Had double the first day registrations from last year so with a pending new release this will be a big one !
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: ASPIRE CAMP AT MCGREW 2015 !!
Thanks James. I do like to share when I can. I certainly have made good use of the Extrude and Weave tool since it became available, and I'm wondering what new magic tool will be in the upcoming Aspire release.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
I will post some hotel info today.
double the number of first day registrations from last year with a pending release this is going to be a big one.
some emails of registrations sent from website addresses go to my junk folder, I do check it. all will get an email confirm for both registration and payment within a day so if you do not contact me
double the number of first day registrations from last year with a pending release this is going to be a big one.
some emails of registrations sent from website addresses go to my junk folder, I do check it. all will get an email confirm for both registration and payment within a day so if you do not contact me
- martin54
- Vectric Archimage
- Posts: 7353
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: ASPIRE CAMP AT MCGREW 2015 !!
I will have to add this to my bucket list, actually it will be top of my bucket list seeing as I don't currently have one
Being in the UK & not having a lot of spare money makes this a bit of a challenge but hopefully one day I will have saved up enough for a trip across
Being in the UK & not having a lot of spare money makes this a bit of a challenge but hopefully one day I will have saved up enough for a trip across
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
My Shop is at 3527 main st Columbia sc 29203. centrally located and near all interstates,,
by interstate, near heavy shopping Harbison
Hilton Garden Inn Columbia/Harbison
434 Columbiana Drive
Columbia, SC, 29212
American Inn St. Andrews
1337 Garner Lane
Columbia, SC, 29210
Comfort Inn Columbia
911 Bush River Road, Columbia, SC 29210
Some have stayed at the Red roof in on Two Notch road
Red Roof Inn Columbia East Ft Jackson
7580 Two Notch Road, Columbia, SC 29223
and in the Vista, walk to food bars etc.
Hilton Columbia Center
924 Senate Street
Columbia, SC 29201
Phone: 803-744-7800
Fax: 803-744-7777
Tollfree: 800-HILTONS
SpringHill Suites by Marriott-Columbia Downtown/The Vista
511 Lady Street
Columbia, SC, 29201
Hyatt Place Columbia/Downtown/Vista
819 Gervais Street
Columbia, SC, 29201
Columbia Marriott Hotel
1200 Hampton Street
Columbia, SC, 29201
CVB SITE
http://www.columbiacvb.com/hotels/
by interstate, near heavy shopping Harbison
Hilton Garden Inn Columbia/Harbison
434 Columbiana Drive
Columbia, SC, 29212
American Inn St. Andrews
1337 Garner Lane
Columbia, SC, 29210
Comfort Inn Columbia
911 Bush River Road, Columbia, SC 29210
Some have stayed at the Red roof in on Two Notch road
Red Roof Inn Columbia East Ft Jackson
7580 Two Notch Road, Columbia, SC 29223
and in the Vista, walk to food bars etc.
Hilton Columbia Center
924 Senate Street
Columbia, SC 29201
Phone: 803-744-7800
Fax: 803-744-7777
Tollfree: 800-HILTONS
SpringHill Suites by Marriott-Columbia Downtown/The Vista
511 Lady Street
Columbia, SC, 29201
Hyatt Place Columbia/Downtown/Vista
819 Gervais Street
Columbia, SC, 29201
Columbia Marriott Hotel
1200 Hampton Street
Columbia, SC, 29201
CVB SITE
http://www.columbiacvb.com/hotels/
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: ASPIRE CAMP AT MCGREW 2015 !!
I have been staying at the Holiday Inn Express Columbia - Downtown and will probably do the same this time. Seems like a good location and is not far from McGrews.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
Re: ASPIRE CAMP AT MCGREW 2015 !!
really looking forward to the camp. learning, seeing, and meeting some of the names I read on the forum. my first time, so a couple of questions, I'm sure there will be more. I see that many people brought their laptops. why? also, will someone be taking videos of the speakers? ted
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
Ted,
There is more information given during the camp than you could imagine.
I bring my laptop so I can try out the new ideas..on the spot....
Nothing like getting back home and remembering that you forgot so much...
As for the video..
I'm not sure but I would doubt it.
It would be hard to capture everything that goes on.
If you watch the tutorials you'll get a great amount of information.
The camp just makes it more real.
The networking is worth it's weight in gold...
Michael
There is more information given during the camp than you could imagine.
I bring my laptop so I can try out the new ideas..on the spot....
Nothing like getting back home and remembering that you forgot so much...
As for the video..
I'm not sure but I would doubt it.
It would be hard to capture everything that goes on.
If you watch the tutorials you'll get a great amount of information.
The camp just makes it more real.
The networking is worth it's weight in gold...
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP AT MCGREW 2015 !!
We do Not video for two reasons, I will get this question several times,, This event is a personal doing that My shop fellows and I do. It started out as a bunch of fun and by doing it this way it has continued to be FUN, when it is not I will stop, I do not do anything unless I get rich or it is FUN and I do not get rich on this camp !! I will let the others speak for the value but if what they tell me is true then I keep holding it. it is set in a large commercial architectural shop, not a hotel it is really at time far more a gathering of great friends who have been blessed to find and use the Vectic software and benefit from that such as I have !!
One attendance is what drives the camp,
Two whether we had attendance or not production cost would drive up expenses
And Three the Most important,, there is no greater value than face to face contact with all these screen names !! the show and tell and meeting and making personal contact is a value you take home and continue to use long after the Camp.
I have made some video of some of it in the past but to video this much volume and produce it ain't cheap
One attendance is what drives the camp,
Two whether we had attendance or not production cost would drive up expenses
And Three the Most important,, there is no greater value than face to face contact with all these screen names !! the show and tell and meeting and making personal contact is a value you take home and continue to use long after the Camp.
I have made some video of some of it in the past but to video this much volume and produce it ain't cheap
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: ASPIRE CAMP AT MCGREW 2015 !!
James does not seem to shut down his business for the three days. There are employees working elsewhere in the building during the camp. Production work on his big Camaster machine may be at a standstill due to safety factors though, I don't know about that. People are wandering around looking at everything there is to see, talking to others on the classroom breaks, taking photos, etc. This is a low key event that is one of the most enjoyable things I have done. There are drinks and snacks provided each day. There are other VCP/Aspire camps in the US that are beyond my driving range but I'm sure they would all be worth going to.
I would hold one of these in my shop, but my class size would have to be limited to three people who already know more than I do.
CarveOne
I would hold one of these in my shop, but my class size would have to be limited to three people who already know more than I do.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com