why cannot put pictures

This is the place to post images of work produced using Aspire
Post Reply
Gerry Perrault
Vectric Apprentice
Posts: 73
Joined: Thu Mar 13, 2008 11:04 pm
Location: Granby,Qc, Canada
Contact:

why cannot put pictures

Post by Gerry Perrault »

i have posted ''and the winner is'' uploaded a file and press add file there is only a blank screenis it the picture
has too great of resolution or what.Gerry
I rather be the leader,than the follower

User avatar
Henry B
Vectric Apprentice
Posts: 57
Joined: Sat Nov 10, 2012 12:08 pm
Model of CNC Machine: Kimla CNC

Re: why cannot put pictures

Post by Henry B »

Press add file find file then press inline or insert, and you will see a link appear where your cursor is in your post then press submit :)

Gerry Perrault
Vectric Apprentice
Posts: 73
Joined: Thu Mar 13, 2008 11:04 pm
Location: Granby,Qc, Canada
Contact:

Re: why cannot put pictures

Post by Gerry Perrault »

Thank you for your help my pictures were too big.Gerry
I rather be the leader,than the follower

JMD
Vectric Craftsman
Posts: 197
Joined: Sun Apr 03, 2011 3:07 pm
Model of CNC Machine: Probotix GX2525 with rotary
Location: Erie, PA

Re: why cannot put pictures

Post by JMD »

Henry B wrote:Press add file find file then press inline or insert, and you will see a link appear where your cursor is in your post then press submit :)
Having trouble also. Did all this and nothing happens.

JMD
Vectric Craftsman
Posts: 197
Joined: Sun Apr 03, 2011 3:07 pm
Model of CNC Machine: Probotix GX2525 with rotary
Location: Erie, PA

Re: why cannot put pictures

Post by JMD »

JMD wrote:
Henry B wrote:Press add file find file then press inline or insert, and you will see a link appear where your cursor is in your post then press submit :)
Having trouble also. Did all this and nothing happens.
Disregard. Having senior moment. File was too large. Sorry.
Attachments
OWL 2.jpg

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: why cannot put pictures

Post by scottp55 »

Boy, That Owl certainly gets around! :)
Nice job!!
I've been "mucking around" with it also. :)
Attachments
OWL 123 3SETTINGS CUTTING LEFT TO RIGHT.jpg
OWL 12.7.14.jpg
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

JMD
Vectric Craftsman
Posts: 197
Joined: Sun Apr 03, 2011 3:07 pm
Model of CNC Machine: Probotix GX2525 with rotary
Location: Erie, PA

Re: why cannot put pictures

Post by JMD »

scottp55 wrote:Boy, That Owl certainly gets around! :)
Nice job!!
I've been "mucking around" with it also. :)
Yes it dose. Thanks for the kind words. Yours are very good also.

Post Reply