Carve (Contour) using large then small bits

This section is for useful tips and tricks for Aspire
Post Reply
erikdaines
Posts: 1
Joined: Thu Jul 24, 2014 2:18 am
Model of CNC Machine: Legacy CNC - Artisan

Carve (Contour) using large then small bits

Post by erikdaines »

When we first saw the Aspire software we saw a demo of someone caving an eagle. He first used a large ball nose bit. He then setup a tool path for a small ball nose bit. It originally calculated a complete redo of the entire eagle, then he selected something and it took out all the tool paths that the previous large ball nose had been able to reach and only left the tool path for a few small areas that the large ball nose could not reach. This was to reduce the total machine time. It looked so easy I thought when I got home I could do it again but, so far I have never been able to figure out how he could just find the tool path for the spots the first large bit could not reach.

Can anyone tell me how to do this, or point me to some help files.

Thanks, Erik

User avatar
mezalick
Vectric Wizard
Posts: 2574
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: Carve (Contour) using large then small bits

Post by mezalick »

I believe you're referring to a process of Rest Machining
Take a look at this posting and the video C21-rest-machining-grapes.wmv

http://forum.vectric.com/viewtopic.php?f=27&t=10481

Michael
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

Post Reply