We got the Optometrist sign hung today

This is the place to post images of work produced using Aspire
Post Reply
User avatar
customquint
Vectric Craftsman
Posts: 236
Joined: Tue Jan 25, 2011 4:18 am
Model of CNC Machine: AXYZ
Location: Piqua, OH
Contact:

We got the Optometrist sign hung today

Post by customquint »

Posted a picture of this one already while it was still setting at the shop with Owen looking though it, thought I'd share it now we got it hung up today. I had to wait for a warmer day to do it and we got to 26 degrees today.
littlejohn projecting1a.jpg
littlejohn projecting2a.jpg

User avatar
T.R.MacMunn
Vectric Wizard
Posts: 318
Joined: Sun Jan 01, 2012 2:30 pm
Model of CNC Machine: CAMaster MC4836
Location: Mountain Grove, Ontario, Canada
Contact:

Re: We got the Optometrist sign hung today

Post by T.R.MacMunn »

Nice clean work, Brian. I like it a lot ........

Paul Kierstead
Posts: 10
Joined: Mon Nov 25, 2013 6:07 pm
Model of CNC Machine: Probotix V90

Re: We got the Optometrist sign hung today

Post by Paul Kierstead »

That is an extremely nice sign, with the right balance of content and detail/decoration.

User avatar
ChrisInEstes
Vectric Wizard
Posts: 834
Joined: Fri Jul 17, 2009 8:00 pm
Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
Location: Estes Park, Colorado, USA

Re: We got the Optometrist sign hung today

Post by ChrisInEstes »

That looks really nice.

Just curious... Does your City/Town require sign permits? How about an engineering drawing & stamp for the bracket & installation?

Thanks for posting the finished version,
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle

User avatar
customquint
Vectric Craftsman
Posts: 236
Joined: Tue Jan 25, 2011 4:18 am
Model of CNC Machine: AXYZ
Location: Piqua, OH
Contact:

Re: We got the Optometrist sign hung today

Post by customquint »

ChrisInEstes wrote:That looks really nice.

Just curious... Does your City/Town require sign permits? How about an engineering drawing & stamp for the bracket & installation?

Thanks for posting the finished version,
Chris
Chris,

My city does require permits. However on this one, this sign is considered a secondary sign, it is under 6 sq ft, and accessory to the entrance of the store front, it did not require one how the zoning is written. If I do need a permit from the city, I also need to get a building permit from the county, and that is where the structural comes in to play. My county has never asked to engineered stamp drawings for wall signs, but I do need them for freestanding signs.

User avatar
ChrisInEstes
Vectric Wizard
Posts: 834
Joined: Fri Jul 17, 2009 8:00 pm
Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
Location: Estes Park, Colorado, USA

Re: We got the Optometrist sign hung today

Post by ChrisInEstes »

customquint wrote:
ChrisInEstes wrote:That looks really nice.

Just curious... Does your City/Town require sign permits? How about an engineering drawing & stamp for the bracket & installation?

Thanks for posting the finished version,
Chris
Chris,

My city does require permits. However on this one, this sign is considered a secondary sign, it is under 6 sq ft, and accessory to the entrance of the store front, it did not require one how the zoning is written. If I do need a permit from the city, I also need to get a building permit from the county, and that is where the structural comes in to play. My county has never asked to engineered stamp drawings for wall signs, but I do need them for freestanding signs.
I have to have an engineering drawing and permit for any hanging, projecting, or freestanding sign, and I understand that. For a wall mounted sign, no matter the size, the town only requires a permit.

I made and installed a 6" x 20" hanging sign a few years ago... The permit and engineering was $325, and the sign itself was only $150... :lol:
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle

User avatar
customquint
Vectric Craftsman
Posts: 236
Joined: Tue Jan 25, 2011 4:18 am
Model of CNC Machine: AXYZ
Location: Piqua, OH
Contact:

Re: We got the Optometrist sign hung today

Post by customquint »

It's crazy on some of these projects and makes it hard to sell when permits are so much. I've had a few of these as well where the cost for permits doubles the cost for the project.

Post Reply