'wavy' doors for bathroom vanity

This is the place to post images of work produced using Aspire
Post Reply
User avatar
rscrawford
Vectric Wizard
Posts: 1099
Joined: Mon Jan 17, 2011 6:49 pm
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
Location: Wetaskiwin, Alberta
Contact:

'wavy' doors for bathroom vanity

Post by rscrawford »

Decided to make some wavy doors for a bathroom vanity, so I could integrate the pulls into the wood. Had to do a little hand carving with gouges to undercut the pulls, but I think they turned out very nice.

Used 6/4 walnut, total carve time was 1hr 6 minutes (1/2" ball nose, 7% stopover, 600ipm with no rough cut, depth of carve was .75" maximum). Got them dry fit on one side of the vanity, still need to make the second side and the toe kicks, then apply the finish.
Bathroom doors.jpg
bathroom doors1.JPG
bathroom doors2.JPG
bathroom doors3.JPG
bathroom doors4.JPG
Russell Crawford
http://www.cherryleaf-rustle.com

rsetina
Vectric Craftsman
Posts: 208
Joined: Sun May 05, 2013 6:37 pm
Model of CNC Machine: Shark HD 2.0

Re: 'wavy' doors for bathroom vanity

Post by rsetina »

A beautiful design. It reminds me of work done by the late Sam Maloof. I like it.
Rick

Shark HD 2.0

PaulRowntree
Vectric Wizard
Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
Location: Guelph, Ontario
Contact:

Re: 'wavy' doors for bathroom vanity

Post by PaulRowntree »

That is beautiful Russell!
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com

David Rueth
Vectric Apprentice
Posts: 52
Joined: Mon Mar 26, 2012 10:24 pm
Model of CNC Machine: Shark Pro Plus HD
Location: Langhorne PA. USA

Re: 'wavy' doors for bathroom vanity

Post by David Rueth »

rscrawford

The drawers looks great and the wood looks stuning. Can't wait to see them fisished. (and I am sure I will not show this post to my wife)

User avatar
zeeway
Vectric Wizard
Posts: 3157
Joined: Thu Feb 11, 2010 9:24 pm
Model of CNC Machine: Self-built
Location: SC, USA

Re: 'wavy' doors for bathroom vanity

Post by zeeway »

That is stunning, Russell.

Angie

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: 'wavy' doors for bathroom vanity

Post by mtylerfl »

I really like how you've done this! Very sleek and flowing - beautiful!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
Mike-S
Vectric Wizard
Posts: 1123
Joined: Mon Jun 13, 2011 6:45 am
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
Location: Hayesville, NC

Re: 'wavy' doors for bathroom vanity

Post by Mike-S »

Came out great. Love the flow and choice of wood.

berzerko
Posts: 17
Joined: Sat Sep 28, 2013 6:37 pm
Model of CNC Machine: techno lc+
Location: new york

Re: 'wavy' doors for bathroom vanity

Post by berzerko »

really like it.. reminds me of a dresser i built 25 years ago, except I had to use hand routers chisels and rasps

how did you create the paths ?

User avatar
galerdude
Vectric Craftsman
Posts: 180
Joined: Sun Dec 12, 2010 7:39 am
Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
Location: Spokane, WA USA

Re: 'wavy' doors for bathroom vanity

Post by galerdude »

Like it a lot!
Very Inspiring.
Regards,
Gale

User avatar
rscrawford
Vectric Wizard
Posts: 1099
Joined: Mon Jan 17, 2011 6:49 pm
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
Location: Wetaskiwin, Alberta
Contact:

Re: 'wavy' doors for bathroom vanity

Post by rscrawford »

berzerko wrote:really like it.. reminds me of a dresser i built 25 years ago, except I had to use hand routers chisels and rasps

how did you create the paths ?
2 rail sweeps for the design, and then just a raster finish tool path with a 1/2" ball nose. Then I had to create the undercut for the handles with hand tools (gouges).
Russell Crawford
http://www.cherryleaf-rustle.com

glenninvb
Vectric Wizard
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: 'wavy' doors for bathroom vanity

Post by glenninvb »

The grain is matched perfect, was that one big 6/4 slab?
Very nice work

User avatar
rscrawford
Vectric Wizard
Posts: 1099
Joined: Mon Jan 17, 2011 6:49 pm
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
Location: Wetaskiwin, Alberta
Contact:

Re: 'wavy' doors for bathroom vanity

Post by rscrawford »

4 pieces glued up, out of 2 separate boards. I buy my wood in 1000bf lifts, and it usually comes well matched for colour.
Russell Crawford
http://www.cherryleaf-rustle.com

User avatar
DDWALKER
Vectric Craftsman
Posts: 161
Joined: Tue Jul 10, 2012 7:17 am
Model of CNC Machine: Homemade-Running Mach3
Location: Nebraska
Contact:

Re: 'wavy' doors for bathroom vanity

Post by DDWALKER »

I really like these. Thanks for sharing.

User avatar
bill_w
Vectric Wizard
Posts: 435
Joined: Wed Sep 08, 2010 12:19 pm
Model of CNC Machine: PRSalpha BT48
Location: Milwaukee,WI

Re: 'wavy' doors for bathroom vanity

Post by bill_w »

Very nice, excellent work.
Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.

Post Reply